20 Most Recent 2006 Mazda 3 Questions & Answers

06 MAZ 3 check the fuse marked ROOM15a ,,under the hood in the corner of the fuse panel, PULL IT OUT and change it whether blown or not ,,,,,should fix it ,,,,,,,,if the display is not bad

2006 Mazda 3 | Answered on Jul 07, 2018

I had that, got a new unit from incurance company scrapyard for $80, changin it was $20 and when opening the old one (the knob is a potentiometer) there was just excess oil between contact surfaces... Local M dealer gave me an estimate of $1500+job

2006 Mazda 3 | Answered on Mar 13, 2018

there are error codes so the scanner in use is not compatible with Mazda protocol

2006 Mazda 3 | Answered on Feb 17, 2018

Pretty much got to be starter related. Loose connection at starter. Bad solenoid. Brushes in starter.
Rap the starter with a hammer and see if the engine will turn over after that.
If it does, you've found your problem.

2006 Mazda 3 | Answered on Jan 02, 2018

Best Manuals Visit the on-line store, known as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.

2006 Mazda 3 | Answered on Dec 01, 2017

That looks like some internal issue, try reaching the wiring systems. You can try getting a manual for your model here. They also sell wiring diagrams I guess. Here's the link Best Manuals
All the best !

2006 Mazda 3 | Answered on Nov 15, 2017

have the fault codes read first and the solution to the problem will be in the codes

2006 Mazda 3 | Answered on Oct 19, 2017

Go to autozone or orielly etc they read the computer for free.

2006 Mazda 3 | Answered on Sep 04, 2017

It's possible but not likely. Check for damage to wheel speed sensors. Also check brake fluid level in reservoir.

2006 Mazda 3 | Answered on Aug 08, 2017

possible that the harnesss and connections to the TCM are damaged ,full of snow or water
it indicates that the torque converter clutch servo/solenoid is not getting a message about the selector position or is damaged

2006 Mazda 3 | Answered on May 31, 2017

certamente il codice indica che non c'? comunicazione tra il cambio automatico e il traction control module o centrallina
controllare il cablaggio e connettori

2006 Mazda 3 | Answered on May 26, 2017

i do have the same problem and i took the car to 5 differant mechanic an dget no solution the aaamco the petboys the mazda dealer another transmission specialist please let me know if u have any solution

2006 Mazda 3 | Answered on May 19, 2017

Not finding what you are looking for?
2006 Mazda 3 Logo

549 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 3
2004 Mazda 3

462 Questions

2005 Mazda 3
2005 Mazda 3

371 Questions

2007 Mazda 3
2007 Mazda 3

159 Questions

2009 Mazda MAZDA3
2009 Mazda MAZDA3

30 Questions

2010 Mazda MAZDA3
2010 Mazda MAZDA3

19 Questions

Top Mazda Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MAZDA3 Mazda

  • MAZDA3 Mazda

Most Popular Question

2006 mazda 3 gear drive indicator lights

  • Cars & Trucks