20 Most Recent 2007 Pontiac Solstice Convertible - Page 8 Questions & Answers


nobody's gonna just know that off the top ov their head.u will need to get hold ov wiring diagrams and look at ignition system.but i'd probally say that it will be the ecu that controls this anyway.the easiest and cheapest way will be to buy yourself a new key or 2 through a dealership using your vehicles vin number expect they will need programming aswell.

Pontiac Cars &... | Answered on Oct 09, 2020


No taillights ? do the turn signals and the brake lights work ?

Pontiac Cars &... | Answered on Oct 05, 2020


Did you try hooking up a professional type scan tool an check codes in the BCM ,or the instrument cluster ? yellow wrench light tells you a problem in the BCM - body control module.

Pontiac Cars &... | Answered on Oct 04, 2020


Turn Signal Lamps
The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, the BCM receives a signal from the hazard switch. The BCM then will send an on-off voltage signal to all the turn signal lamps. All the turn signal lamps will flash including both IPC turn signal indicators.
Stop Lamps
The body control module (BCM) is responsible for controlling the stop lamps. When the driver presses the brake pedal, the BCM will receive a signal from the brake pedal position sensor. The BCM then supplies battery positive voltage to both left and right stop lamp assemblies and to the center high mounted stop lamp (CHMSL). The stop lamps are grounded at G401 and G403. The CHMSL is grounded at G302.

Something is messing with the BCM'S mind ,bad input data ,shorted circuit etc... Hooking up a professional type scan tool is needed to read BCM DTC'S - diagnostic trouble codes an view live data to the BCM .

DTC B3948 02: Left Front Turn Signal Circuit Short to Ground
DTC B3948 05: Left Front Turn Signal Circuit Short to Battery or Open
DTC B3949 02: Right Front Turn Signal Circuit Short to Ground
DTC B3949 05: Right Front Turn Signal Circuit Short to Battery or Open

DTC B3950 02: Left Rear Turn Signal Circuit Short to Ground
DTC B3950 05: Left Rear Turn Signal Circuit Short to Battery or Open
DTC B3951 02: Right Rear Turn Signal Circuit Short to Ground
DTC B3951 05: Right Rear Turn Signal Circuit Short to Battery or Open

Your best bet ,take it to a qualified repair shop.

Pontiac Cars &... | Answered on Oct 02, 2020


The under dash wiring harness probably includes the stereo harness all in one wrapped bundle . And switching that out is a chore .

Pontiac Cars &... | Answered on Oct 01, 2020


Park, Tail and Marker Lamps
The park, tail, and marker lamps, including the license lamps, are turned ON when the headlamp switch is placed in the PARK or HEADLAMP position, or anytime the headlights are requested. The PARK LAMPS fuse in the rear fuse block supplies battery positive voltage to the PARK LAMP relay switch contacts. The PARK LAMPS fuse in the rear fuse block also supplies battery positive voltage to the PARK LAMP relay coil. When the park lamps are turned ON, the body control module (BCM) energizes the park lamp relay. Current flow is from the PARK LAMP relay to their respective park and marker lamps and to ground. Ground is provided at G101, G102, G401, and G403.

Fuse Block - Rear
Left side of the rear compartment, behind the left rear wheel well

6
PARK LPS Fuse
10A
PARK LPS Relay 27

Pontiac Cars &... | Answered on Sep 20, 2020


The instructions I have are 20 pages long, look in your owner's manual or maybe someone else will come up with a shortcut.

Pontiac Cars &... | Answered on Sep 06, 2020


when does it overheat...highway or street stop and go...or both?

Pontiac Cars &... | Answered on Aug 29, 2020


wiring diagram for what sytem - headlamps , horn , instrument panel etc....

Pontiac Cars &... | Answered on Aug 29, 2020


5v ref goes to several different sensors. Could be a bad sensor, or wiring, or the ECM its self.

You'll need to isolate 5v ref at the ECM and then check the voltage at the 5V REF pin of the ECM with DMM. If you get 4.75 to 5.25 volts DC then likely the ECM is ok, but you'll need to load test.

If a load test of the ECM 5V REF passes then likely a sensor is bad or there's a damage wire... could be anywhere.

Try searching videos from "south main auto". Eric(?) does excellent videos explaining how to. Pretty sure he has videos specific to 5V REF.

Pontiac Cars &... | Answered on Aug 20, 2020


Utube or pinterest..or partstore freehelp. Dont git undr acar w out jackstands..ajack alone can move n fall..weargloves

Pontiac Cars &... | Answered on Aug 09, 2020


https://www.youtube.com/watch?time_continue=906&v=E1n-EHM2YF4&feature=emb_title

please watch the video and everything will be answered thank you

Pontiac Cars &... | Answered on Jul 22, 2020


You say it cranks but won't start ? Try spraying carb. clean into the engine through the throttle plate . If it starts an dies you have a fuel delivery problem . If it doesn't pull the coils an module .

Pontiac Cars &... | Answered on Jul 16, 2020


Did it start before you replaced the switch ? Why did you replace the switch if the car started ? Who replaced the switch ? A repair shop or you ?

Pontiac Cars &... | Answered on Jul 15, 2020


the low side fill port is on the passenger side rear or the engine.

Pontiac Cars &... | Answered on Jul 13, 2020


check the vents/drainage slots ain't blocked. next check seals for damage/warping.

Pontiac Cars &... | Answered on Jul 07, 2020


Is the engine turning over with the key in the start position? If the engine is not spinning over and you hear a whining noise, the starter is not engaging the flywheel. If the engine is turning over with the starter engaged, the engine has most likely jumped time that creates low or no compression which results in the whining noise.

Pontiac Cars &... | Answered on Jul 06, 2020


Check for DTC'S - diagnostic trouble code's - hook up a scan tool . View live data ,what percent is the PCM commanding the alt. on ? Voltage drop test cable connections .https://www.youtube.com/watch?v=EMS8On17BnM

Pontiac Cars &... | Answered on Jul 01, 2020


https://www.youtube.com/watch?v=cWxiGmtpqW8

Pontiac Cars &... | Answered on Jun 24, 2020


On the 2006 G6, it is mounted to the power steering pump near the alternator. Remove the dipstick from the reservoir. The fluid level should be in the cross-hatched area of the dipstick. Add small amount of power steering fluid until the level is correct.

Pontiac Cars &... | Answered on Jun 17, 2020

Not finding what you are looking for?
2007 Pontiac Solstice Convertible Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2006 Pontiac Solstice
2006 Pontiac Solstice

102 Questions

2009 Pontiac Solstice
2009 Pontiac Solstice

5 Questions

2008 Pontiac Solstice GXP
2008 Pontiac Solstice GXP

5 Questions

2009 Pontiac Solstice Convertible
2009 Pontiac Solstice Convertible

1 Questions

2007 Pontiac Solstice
2007 Pontiac Solstice

2 Questions

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Solstice Pontiac

  • Solstice Pontiac

Most Popular Question

2007 pontiac solstice

  • Cars & Trucks
Loading...