20 Most Recent 2007 Mitsubishi Outlander XLS Questions & Answers

It appears you got two belts on this, You would remove power steering belt first. Sometimes, the power steering body has bolts you can loosen, to get slack in the belt, with the bolts loose, you rotate the body, to get slack in the belt. With the belt on the right, you would rotate the tensioner to get slack in the belt, to remove and install.
I had to go to paint to draw the belt diagram, so it isn't exact, but, should be close enough.
I have no repair info on this vehicle.

outlander belt-wza1wleq300iik3xirqqjoxy-3-0.jpg

2007 Mitsubishi... | Answered on Nov 15, 2020

If your TPMS light is lit solid, air your tires to proper pressure (32-35psi) then drive 1/4 mile and it will reset itself.

If your tire pressure light is FLASHING, you have a fault in the TPMS system and require a trip to a shop to find out what is wrong.

2007 Mitsubishi... | Answered on Feb 20, 2019

There should be a small white sticker in the glove box with a 4 digit code and another series of numbers. This should be your universal entertainment unlock code.

2007 Mitsubishi... | Answered on May 13, 2018

Order the owner's manual

2007 Mitsubishi... | Answered on Oct 15, 2017

Sounds like your alternator stopped working....

2007 Mitsubishi... | Answered on Jul 20, 2017

Yes a fuse a relay or maybe the clutch in the pump may have gone.

2007 Mitsubishi... | Answered on Oct 13, 2016

Could be the relay if not wiper motor may have fault

2007 Mitsubishi... | Answered on Oct 13, 2016

Did you have same size tires put on ? With the light flashing there is a DTC'S - diagnostic trouble code stored , have to have diagnostic tool hooked up . That's the only way your going find out what the problem is .

2007 Mitsubishi... | Answered on Oct 02, 2016

once the car has a service the workshop should reset the service indicator using an electronic scan tool via the on board diagnostic socket OBD if the light shows up before its next service is due there is a fault which needs to be diagnosed ,could be a lot of things,Airflow meter dirt , bad airtemp sensor or water temp sensor it will automatically store all errors in the DME or ecu.

2007 Mitsubishi... | Answered on Aug 05, 2016

Check your coolant level when engine cold, low level coolant does not circulate very well at idle and will cause poor heating,at higher RPM water pump turns faster to help circulate.
press the helpful button,

2007 Mitsubishi... | Answered on Jan 29, 2016

Turn the key off.

Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed.

Press and hold the "info" button until the maintenance screen begins flashing.

Release the "info" button and then push and hold it it for one second.

Your Maintenance intervals should reset to +6 months and +7500 miles since the last interval amount.

Note that if you have not reset it for more than one interval, you may need to do it more than once. If you have not done it for many intervals, you may need to have it reset with the scantool at a dealer, as I have run into a handful of vehicles that the oil change reminder locked up after 3-4 "intervals" were skipped/not reset.

2007 Mitsubishi... | Answered on Sep 19, 2015

Not finding what you are looking for?
2007 Mitsubishi Outlander XLS Logo

210 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Outlander Mitsubishi

  • Outlander Mitsubishi

Most Popular Question

abs light alarm showing 2w 4 w lock

  • Cars & Trucks