20 Most Recent 2008 Chevrolet Trailblazer Questions & Answers


Check the fuel pressure , the non return could be faulty letting the fuel drain back to the tank , By switching on and off you are building up pressure in the fues system .

2008 Chevrolet... • Answered on Apr 11, 2021


It can be low fuel pressure issue or clogged fuel pump.Or its engine related issues,---------------Check the help link mentioned below to troubleshoot the problem :------

Engine stalls when gas is given?

http://technoanswers.blogspot.in/2012/01/engine-stalls-when-gas-is-given.html-------------

Car stalls when MAF sensor is connected?

http://technoanswers.blogspot.in/2012/01/car-stalls-when-maf-sensor-is-connected.html------------

Car Engine Stalls While Driving?

http://schematicsdiagram.blogspot.com/2011/12/car-engine-stalls-while-driving.html

--------------

Car stalls and throws white smoke from exhaust?

http://repairhelpcenter.blogspot.com/2012/01/car-stalls-and-throws-white-smoke-from.html-------------

Stalls And Dies At Stop Sign?

http://www.howtobyme.blogspot.com/2012/07/stalls-and-dies-at-stop-sign.html------------

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

------------

Nissan Pathfinder stalls and bucks on Acceleration?

http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-stalls-and-bucks-on.html-----------------

1992 Chevrolet stalls and shutdown?

http://schematicsdiagram.blogspot.in/2012/04/1992-chevrolet-stalls-and-shutdown.html------------

Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html--------------

1990 mazda 323 stalls and quit running?

http://technoanswers.blogspot.in/2012/02/1990-mazda-323-stalls-and-quit-running.html-------------

2000 Toyota Camry: Idling and Stalling Problem?

http://whatisbyme.blogspot.in/2012/05/2000-toyota-camry-idling-and-stalling.html---------

1995 Toyota Corolla: Stalls, Sputters and Pops Through Intake Manifold?

http://whatisbyme.blogspot.in/2012/05/1995-toyota-corolla-stalls-sputters-and.html----------------

1999 Toyota Camry: Erratic stalling and high engine RPM at idle?

http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html--------------

Dodge Dakota stalls, stumbles at idle. Has low fuel flow and runs hot?

http://schematicsdiagram.blogspot.in/2012/03/dodge-dakota-stallsstumbles-at-idlehas.html--------------

1994 Toyota 4Runner: Stalls and Stops While Driving?

http://whatisbyme.blogspot.in/2012/05/1994-toyota-4runner-stalls-and-stops.html---------------

1997 Toyota Camry: Erratic Idle and Intermittent engine stalling?

http://technoanswers.blogspot.in/2012/04/1997-toyota-camry-erratic-idle-and.html-------------

Ford Maverick: No Idle and Stalling issues?

http://schematicsdiagram.blogspot.in/2012/04/ford-maverick-no-idle-and-stalling.html-------------These details will help.Thanks.

2008 Chevrolet... • Answered on Jun 27, 2019


Philip, You may have to have a good tech, check,diagnose and estimate repair. Could be a few things causing poor AC, recheck your charge level,check your fan at the condenser, make sure the condenser isn't obstructed, compressor clutch could be faulty, system could be plugged with contaminates limiting refrigerant flow.You say the system has been recharged, was it done properly, if not system could be plugged. AC system should of had system checked for leaks,evacuated, flushed, new orifice tube, then recharged with proper quantities of oil and refrigerant. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." Car Air Conditioning Problem Diagnosis Repair Help Automotive Air Conditioning adsbygoogle window adsbygoogle push Repair... Car AC Not Blowing Cold Enough Car Repair Information From MasterTechMark

2008 Chevrolet... • Answered on Dec 10, 2018


No, it's not supposed to be like that. It's blown.

2008 Chevrolet... • Answered on Dec 28, 2017


Sounds like a bad connection behind the dash panel.

2008 Chevrolet... • Answered on Dec 24, 2017


Check the rear end gears

2008 Chevrolet... • Answered on Jul 08, 2017


Hi Christy.It sounds like your BCM, (Body Control Module) is failing, or your Connector/Connectors to your BCM could be at fault. They could be corroded, Damaged, burned, loose, and/or could possibly have bad wires on or going to the connectors. I would take it to a mechanic that you trust and have them check it for you. Do you have a check engine light on? Hope this helps.

2008 Chevrolet... • Answered on May 25, 2017


Hi Danny. I would go to O'reilly auto parts (not sure about other parts stores), they have a key fob checker, this will let you know if your fob is working or not. They also have replacement cases that you can put your circuit board in if your fob is bad. Hope this helps.

2008 Chevrolet... • Answered on May 25, 2017


The Headlamps On at Exit and Perimeter Lighting modes can be adjusted using the steering wheel controls to select the wanted function as displayed in the driver information center. The Headlamps On at Exit selection will allow the driver to customize the period of time that the headlamps remain illuminated upon exiting the vehicle. This period can be adjusted from 0 seconds to 180 seconds. The Perimeter Lighting feature allows the driver to select if they want the headlamps and backup lamps to illuminate when the door UNLOCK button on the key fob is activated. This feature can be turned ON or OFF by using the driver information center steering wheel control buttons. programming Features with the Driver Information Center (DIC) To enter programming with the driver information center (DIC), perform the following actions: Turn the ignition to RUN. Place the vehicle in PARK. Press the Personalization button on the steering wheel to enter personalization programming. Automatic Door Locks Continue with the following steps in order to personalize the automatic door locks: Press the Select button in order to enter the menu. The first choice seen is the current setting. Press the Select button in order to scroll through the following options: • LOCK DOORS: IN GEAR • LOCK DOORS: WITH SPEED Press the Personalization button in order to advance to the next option. Press the Select button in order to enter the menu. The first choice seen is the current setting. Press the Select button in order to scroll through the following options: • UNLOCK DRIVER: IN PARK • UNLOCK DOORS: IN PARK • UNLOCK DOORS: AT KEY OUT • UNLOCK DOORS: MANUALLY Press the Personalization button in order to advance to the next option. Remote Activation Verification Continue with the following steps in order to personalize the remote activation verification feature: Press the Select button in order to enter the menu. The first choice seen is the current setting. Press the Select button in order to scroll through the following options: • LOCK FEEDBACK: BOTH • LOCK FEEDBACK: OFF • LOCK FEEDBACK: HORN • LOCK FEEDBACK: LAMPS Press the Personalization button in order to advance to the next option. Press the Select button in order to enter the menu. The first choice seen is the current setting. Press the Select button in order to scroll through the following options: • UNLOCK FEEDBACK: BOTH • UNLOCK FEEDBACK: OFF • UNLOCK FEEDBACK: HORN • UNLOCK FEEDBACK: LAMPS Press the Personalization button in order to advance to the next option. Delayed Lighting Continue with the following steps in order to personalize the delayed lighting feature: Press the Select button in order to enter the menu. The first choice seen is the current setting. Press the Select button in order to scroll through the following options: • HEADLAMP DELAY: 10 SEC • HEADLAMP DELAY: 20 SEC • HEADLAMP DELAY: 40 SEC • HEADLAMP DELAY: 1 MIN • HEADLAMP DELAY: 2 MIN • HEADLAMP DELAY: 3 MIN • HEADLAMP DELAY: OFF Press the Personalization button in order to advance to the next option. Perimeter Lighting Continue with the following steps in order to personalize the perimeter lighting: Press the Select button in order to enter the menu. The first choice seen is the current setting. Press the Select button in order to scroll through the following options: • PERIMETER LIGHTS: OFF • PERIMETER LIGHTS: ON Press the Personalization button in order to advance to the next option.

2008 Chevrolet... • Answered on Apr 13, 2017


No it was/is not.

2008 Chevrolet... • Answered on Mar 22, 2017


Yes - should be located on the engine block at the back on the passenger side behind the exhaust manifold. You may need a special socket to remove the old one.

2008 Chevrolet... • Answered on Mar 11, 2017


For the I6 engine, there is a Throttle Body Position Sensor, (TPS) attached to the actual throttle body. This cannot be removed from the throttle body itself. You need to buy the whole throttle body which includes the TPS. Just did this myself, one of the chain stores offers lifetime warranty by the way. It's very easy, turn off all HVAC inside the cab, then disconnect the battery first, very important step. Take the top resonator off, unhook the black ducting going to the air cleaner box and throttle body. Disconnect the electrical connector on top of the throttle body. Now it's just 4 easy bolts for the entire throttle body to come off. You CAN reuse the old hard plastic O-ring, no need to get another one unless it's damaged.

2008 Chevrolet... • Answered on Mar 08, 2017


You need a special tool that holds the hydraulic valve in the ABS control unit open for bleeding.

2008 Chevrolet... • Answered on Feb 19, 2017


Sounds like a bad brake light switch which is located under the dash on the brake pedal arm. If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

2008 Chevrolet... • Answered on Feb 07, 2017


have the battery load tested as the indications are a battery problem the battery is failing because of the cold conditions

2008 Chevrolet... • Answered on Nov 23, 2016


For the I6 engine, the actual thermostat is on the drivers side below the alternator. The coolant temp sensor is in a bad place. Approx 06' and up, they changed the location to the drivers side, wayyyy in the back. PITA to get to. 05' and older had it located right above the thermostat, was easy.

2008 Chevrolet... • Answered on Nov 08, 2016

Not finding what you are looking for?
Cars & Trucks Logo

388 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

john h

Level 3 Expert

24055 Answers

Ryan Lutton
Ryan Lutton

Level 3 Expert

1266 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14874 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

TrailBlazer Chevrolet

  • TrailBlazer Chevrolet

Most Popular Question

2008 chevy trailblazer ss problem start

  • Cars & Trucks
Loading...