20 Most Recent 2008 Chevrolet Hhr - Page 5 Questions & Answers

If you don't know how to change it, you probably don't know that it has to be flashed before installed.

The DTC is for the cam position actuator sensor. That does not necessarily mean you need a new sensor but it may. Prices vary wildly depending on where you buy them, same with labor rates. The dealer will cost you over $100 per hour in some parts of the country, I do side work for $30 so you need to get a quote from someone localy.

A local Checker or Auto zone can help with a code pull to give an idea of the troubled area.

more info,jerking ,worked on car problem came ?

Antenna ProblemGounding Issues almost anywhereAlternator Diodes BadThose problems are usually the result of thelast person to work on it

Most likely the blower motor resistor or the fise for the low speeds. The high setting for the blower motor is on a separate circuit than the other lower settings.

not necesarilly....but try that first may be remote sensor on car maybe a bad ground to it