2007 Hyundai XG300 - Answered Questions & Fixed issues


Clutch master cylinder bypassing r&r bleed as necessary

2007 Hyundai... | Answered on Aug 29, 2013 | 281 views


how to santa car back seat cover removal

2007 Hyundai... | Answered on May 20, 2012 | 1,964 views


It's all copyright material and costs a fortune to develop, so sorry, you simply won't find what you're after for free.

2007 Hyundai... | Answered on Sep 20, 2010 | 558 views


car-part.com

2007 Hyundai... | Answered on Aug 24, 2010 | 487 views


meron problema un pcm mo hindi kasi 100% sure yun pagrepair.Pero tingnan mo un connector ng pcm baka corroded na.kung di ako nagkakamali nasa consol box malapit sa gas pedal un pcm.Tangali mo un cover makikita mo na un pcm.Tangalin mo muna un battery negative bago tangalin un mga connector

2007 Hyundai... | Answered on Feb 01, 2010 | 342 views


sorry to say trans is fried.
Consider a used trans from the bone yard
or a rebuilt one.
An independent auto shop is likely to give you a fair price!!!!!!!!!!!!!!!!!!!

2007 Hyundai... | Answered on Jul 06, 2009 | 936 views


Does the scanner show any other codes? Although you changed the TPS sensor,did you put in a new thermostat?

Hyundai XG300... | Answered on Feb 15, 2019 | 56 views


Do a tune up and if it's still a problem check your Iac or tps idle air control or throttle position sensor

Hyundai XG300... | Answered on Feb 05, 2018 | 176 views


If it is unresponsive to throttle changes it could be the throttle position sensor or maf sensor. Get some throttle body cleaner and follow the directions. Depending on location of the maf sensor you may need to remove it to clean it. Google search it and watch some video on it.

Hyundai XG300... | Answered on May 26, 2017 | 61 views


If your mechanic created this new problem after working on your car it would be up to him to fix the problem at no charge.

Hyundai XG300... | Answered on Apr 12, 2017 | 52 views


There is something drastically wrong with the transmission on your car and it is in your best interest to have a tranny pro look at it.

Hyundai XG300... | Answered on Apr 04, 2017 | 136 views


The only thing that can cause this loss of power is the air con compressor , have it replaced.

Hyundai XG300... | Answered on Sep 27, 2016 | 28 views


code p 1504 refers to cruise control switch, cancel--circuit malfunction===causes -wiring---cruise control switch

Hyundai XG300... | Answered on Oct 09, 2015 | 71 views


answered already,it is a relay under the hood

Hyundai XG300... | Answered on May 14, 2015 | 45 views


there is no fuse,it is a relay under the hood

Hyundai XG300... | Answered on May 14, 2015 | 104 views


Have you checked the connections at the other end of the battery cables ?

Hyundai XG300... | Answered on Jan 31, 2014 | 64 views


it is VERY rare that an alternator will produce more voltage. normal alternator voltage range is about 13 to 15 volts. It is not impossible that it will go over 15 volts, but highly unlikely. As for the price and the exact job time, hard to tell since i don't use same currency and we don't have hyundai santros where i live, but looking at the model on google, i'd say the alternator is a pain to get out of the hood and requires alot of other parts to be removed just to get it in/out. As for the alternator itself, if the price is too high, you can always check for rebuilt ones or even have yours rebuilt. Usually when voltage is the problem, the part in fault on the alternator will be the regulator pack on the end of the alternator and in most cases can be changed easily, but finding the regulator pack to buy can be hard and sometimes will cost as much or more than a rebuilt alternator on some models. So best bet is to start by checking under the hood to see where the alternator is and how to get it out. If you can't see the alternator easily, chances are it'll be a pain to get out of there and take a few hours of labor. If so, then price would be justified. I've seen mazdas before that needed to have the engine moved a bit just to get the alternator out, or like renault 5 that the easiest way to get alternator out is to cut a hole in the floor on passenger side, cause if not the whole engine needed to be out of the car to change the alternator. So like i said, in some cases, changing something simple like an alternator can require ALOT of work.

Hyundai XG300... | Answered on Dec 31, 2013 | 199 views

Not finding what you are looking for?
Cars & Trucks Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...