20 Most Recent
Questions & Answers
Why is my temp gauge stuck on cool
1. The gauge in the instrument cluster could be faulty.
2. The coolant sender/temp sensor unit on the cooling system in the engine bay could have failed and the gauge in the car is getting no signal from it so it is just sitting on the bottom cold setting.
A mechanic with a decent comprehensive scan tool would be able to run a scan and see what faults the computer is generating and that would give an indication as to where the problem is if the gauge in the instrument cluster itself is not faulty.
Rear sonar not working on 07 maxima
To top off what Jason mentioned, I went a little further to find out how much it cost to repair/ replace the rear sonar speaker for my 08 Maxima at the dealership. The cost was an astounding $67.00 plus taxes and they had to order the part. After some time browsing the web, I came upon a site where the replacement part cost a total of $16.00 to include shipping and handling. The site is ( BeStar technologies inc) part number BMS3650l-P2-HT LF. Check it out for yourself. I comes with the black plastic casing, I simply pulled out the little speaker and placed into the casing of my 08 Maxima and it works great!
Xtronic tranmisson are they any good2014 nissan
they adjust to you needs as well the driver if you have 2 drivers on the same vehicle it will program itself after 20 times on gas pedal or 30 mins of driving so people dont like this as well going up or down moutain roads the trans shifts by itself or applies the brakes going down hill so its a different adaptation of learning to drive it
Wil not shift out of park
Check and make sure that the brake switch is operative, and then look at the shift interlock either in the console or on the transmission is in order. And as always, check ALL your fuses first! Sometimes the simplest solutions are the most over looked. Make sure that the linkage is not worn or bent, and lastly, look again for a simple mechanical failure that is easily overlooked. Maybe it could be as simple as a coin or foreign object that is obstructing the actual operation of the shifter lever. Ya never know!
Not finding what you are looking for?