20 Most Recent 2007 Ford Ranger FX4 Off-Road - Page 5 Questions & Answers

0helpful
1answer

I need to know how install the ac compressor and

you need to remove the refridgerant first before removing the AC Pump. Thats a start. I would look into having it done professionally.
7/23/2009 5:46:24 PM • 2007 Ford Ranger... • Answered on Jul 23, 2009
0helpful
3answers

Hi there,i need to get a copy of Ford Ranger 2007

check out rockauto.com

6/6/2009 1:36:35 AM • 2007 Ford Ranger... • Answered on Jun 06, 2009
0helpful
1answer

Does the 2002 ranger automatic, 6 cylinder, 3 L

has a timing chain, under the engine front cover.
6/4/2009 4:03:03 AM • 2007 Ford Ranger... • Answered on Jun 04, 2009
0helpful
3answers

What does O D on my ford ranger dashboard mean ?

O/D off is indicating that your overdrive has been disabled or turned off. if your vehicle is equipped with overdrive and this is happening then it usually means that overdriver is not engaging properly.

if your vehicle is not eqquipped with overdrive and is happening usually will indicate an electrical short

either way you should consider taking to mechanic shop
5/16/2009 4:23:30 PM • 2007 Ford Ranger... • Answered on May 16, 2009
0helpful
1answer

Can't remove bolts to mount running boards

Do u or any friends have an air compressor? If u can borrow an impact gun the bolts will come right off. I've had an air compressor for years, purchased an impact driver, can't believe how easy it removes bolts I can't budge. U may be able to rent a portable compressor and impact gun. Hope this helps, good luck, and let me know how it comes out.
12/28/2008 1:02:16 PM • 2007 Ford Ranger... • Answered on Dec 28, 2008
0helpful
1answer

2007 Ford Ranger

Hi, I also own a 2007 Ford Ranger. That's the TPMS light. It's telling you the tire pressure is low. Check the tire pressure and if make sure it's where it needs to be (there's a sticker in the door jamb that tells you what the tire pressure should be set to.

Oh, and I found a PDF copy of the 2007 Ranger owners manual here - http://www.fordf150.net/2007/
12/15/2008 11:30:45 PM • 2007 Ford Ranger... • Answered on Dec 15, 2008
0helpful
1answer

Water accidently pet in power steering

You need to drain the power steering, it won't be working fine if u don't correct it now. You must remove one of the hoses, start the vehicle while someone watches the flow of fluid, as soon as it stops draining, turn off the car, reconnect the hose, and fill w/ the proper fluid. To get the air out of the lines, (after refilling to cold mark),start car, turn wheels back and forth several times, recheck level, repeat if necessary countrycurt0
10/6/2008 4:00:58 AM • 2007 Ford Ranger... • Answered on Oct 06, 2008
0helpful
1answer

2000 ford ranger

Check the fuses.
7/30/2008 8:08:58 PM • 2007 Ford Ranger... • Answered on Jul 30, 2008
0helpful
2answers

2001 Ford Ranger, tail light stopped working, everything else wor

fuses control each side of car so two feeds to rear lights if power lost in both rear lights and front side lights work then its a connection multiblock somewhere but never seen this vehicle in spain so i couldnt tell you where to look only a mechanics logical diagnostics,sorry about this
10/10/2023 5:00:46 PM • Ford Ranger Cars... • Answered on Oct 10, 2023
0helpful
1answer

My 2014 Ford ranger wildtrak radio is not working and neither are any of the centre dash functions

Check fuses before taking anything apart.
3/18/2023 5:17:51 PM • Ford Ranger Cars... • Answered on Mar 18, 2023
0helpful
2answers

1994 ford ranger 4.0 fuel line diagram

This site doesn't have the diagrams, but the system is not complicated, what is the specific information you need and I will try to address the issue from memory, I am a retired dealer technician.
3/12/2023 2:08:15 PM • Ford Ranger Cars... • Answered on Mar 12, 2023
0helpful
2answers

Checked dtc codes in my

Check and / or replace plugs, wires, distributor cap, coil / coilpack

Change plugs especially if you have over 50k miles on them.
Wires can sometimes have cracks in them causing misfire.

Hope this helps...
3/2/2023 8:30:17 AM • Ford Ranger Cars... • Answered on Mar 02, 2023
0helpful
1answer

Vacuum routing 2000 year ford Ranger 3.0L 6 cyl. diagram

USA car its sold world wide and no to have same smog parts. ever, not even California versa's FED. well the service manual covers that. (usa) but the problem is it is not one page. it is many this is covered in the chapters of all things vacuum smog EVAP,? runs from fuel fuel tank and to engine.yes Canister Vent Solenoid P04xx or P14xx dtc scan errors. do tell em. then brake chapter, brake booster, yes. if engine has FPR, the fuel chapter FPR vacuum. YES EGR vac solenoid, YES. HVAC climate control in the CAB dash?YES the online manual zero unified vacuum pages. just by topic above. some USA cars 2000 have hood sticker for VAC, open hood look up and under EPA smog sticker there. 3.0L V6 buy the OEM real manual used from ebay or go here read here https://eautorepair.net/Marketing/Default.asp
2/4/2023 7:17:32 PM • Ford Ranger Cars... • Answered on Feb 04, 2023
0helpful
1answer

Torque sequence 97 ford ranger 2.3 cylinder head

12/30/2022 2:06:38 AM • Ford Ranger Cars... • Answered on Dec 30, 2022
0helpful
1answer

How do I change the front park light bulb on a ford ranger pickup 2007 south African model

Try removing the plastic inner wing panel. It is held on with plastic two-piece plugs which can be removed by using a flat blade screwdriver to remove the centre part of the plug. No all the plugs need to be removed as the panel will bend to give you access. If you see another panel behind this panel, don't panic, simply reach behind and up to access the park light and indicator light bulb holders. They twist anticlockwise to remove them. If need be, someone with a torch can guide you to the bulb holder by looking from above.
12/4/2022 6:26:53 AM • Ford Ranger Cars... • Answered on Dec 04, 2022
0helpful
2answers

Why did my Ford Ranger make a frying noise under the dash close to brake pedal after the pedal was pushed and went all the way to the floor?

Hi, please first open your hood and check if there's any type of fire or smoke coming out from the area close to where you heard the sound. If not, then it might be two materials rubbing between each other that are not supposed to be touching. Please work with a mobile mechanic to properly diagnose this issue. Thank you.
11/6/2022 12:08:08 AM • Ford Ranger Cars... • Answered on Nov 06, 2022
0helpful
2answers
0helpful
1answer

Cylinder head torque settings for ford everest

ford everest duratorq need cylinder head torque
9/7/2022 7:58:17 PM • Ford Ranger Cars... • Answered on Sep 07, 2022
Not finding what you are looking for?
2007 Ford Ranger FX4 Off-Road Logo

146 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ranger Ford

  • Ranger Ford

Most Popular Question

park lights keep blowing fuses

  • Cars & Trucks
Loading...