2008 Hyundai Accent - Answered Questions & Fixed issues
On Hot days when I park in the sun , the car's
replace the battery hyundai/kia use some pretty crappy batteries i am a kia / hyundai tech and have had to replace batteries when the cars have come off the truck i would buy an interstae or exide and you wont ahve the issue again
8/23/2022 9:37:49 AM •
2008 Hyundai...
•
Answered
on Aug 23, 2022
•
347 views
No heat on drivers side of 2008 Hyundai Accent
it is only one way from coming air...upper sides are distributed by holes it is not possible one side gives warm another gives cool....if one side totally blocked it has problem in this hole not with fan..
8/22/2019 4:11:30 AM •
2008 Hyundai...
•
Answered
on Aug 22, 2019
•
1,501 views
I am changing my oil
sump plugs are normal right hand threads from the front it will be a counter clockwise direction
11/25/2017 9:07:28 PM •
2008 Hyundai...
•
Answered
on Nov 25, 2017
•
178 views
2008 hyundai accent runs rough P0420 code
co0de p 0420 refers to vat converter bank 1 below threshold ===causes ---cat converter---wiring ---HO2S ( heated oxygen sensor in the exhaust manifold bank 1 before the cat converter) you have possible 2 problems
1--- the HO2S is faulty but that alone will not result in what you describe
It's function is to read the exhaust gas composition out of the combustion chamber and report to the ECM so that the air fuel ratio can be maintained according to set parameters
the most likely problem is a failed cat converter that is blocking the exhaust system
with the exhaust not flowing freely, there is excessive back pressure and that stops the exhaust gas from exiting the combustion chambers and so rpm is restricted and the economy takes a nose dive
I would consider that you have the cat tested and /or replaced as that will be the base fault causing the problems
10/27/2017 3:10:23 AM •
2008 Hyundai...
•
Answered
on Oct 27, 2017
•
246 views
I HAVE ACCENT 2008 MY ENGINE DOES NOT WORKING
when washing an engine you have to be careful any seal on the electrics can be weak and water can get in this will disrupt the signals the ecu uses. you will need to remove one by one every sensor cap were the wiring goes in and check there is no water in them, even the ecu connection, any water found dry out and replace the seal as its weak, you have to be careful when washing engines they don't get that wet in normal running, i usually steam clean the engine bay as this does not use excessive amounts of water and removes oil and grease better than water on it own.
7/3/2017 3:45:23 PM •
2008 Hyundai...
•
Answered
on Jul 03, 2017
•
59 views
WHAT CAUSES A CAR TO STOP RUNNING WHILE PUMPING GAS
If you're pumping gas into a running car.....that's an invitation for a disastrous fire. Most newer cars have pressure sensors in the fuel tank for the pollution control system and safety systems. these systems prevent conditions for a refueling fire to exist.
1/22/2017 7:25:45 PM •
2008 Hyundai...
•
Answered
on Jan 22, 2017
•
50 views
I have a 2008 Hyundai Accent and none of my brake
check your brake light switch on the brake pedal. See if it has power. Check one side for poer and the other for power while applying the brakes. If it has power its most likely the turn signal switch Brake lights also go thru that switch.
8/25/2016 10:22:36 AM •
2008 Hyundai...
•
Answered
on Aug 25, 2016
•
640 views
Firing order
Type into a search engine [Google, for example...] "firing order 2008 Hyundai Accent"....
7/12/2016 2:39:37 PM •
2008 Hyundai...
•
Answered
on Jul 12, 2016
•
326 views
Not finding what you are looking for?