20 Most Recent
2008 GMC Sierra 2500HD 2WD - Page 6 Questions & Answers
Need 12v switched power source in the dash.
best thing to do, as i presume you want a completely new power feed , run a power and earth cable to the battery and connect the power to the positive pole and place a fuse inline at that point and connect the earth wire to the neg pole , leave the fuse out until you have run the cable to where you want it ,this is a much safer way as can't interfere with any other components already fitted keep me updated if you wish
A/C Compressor and turn signals not working
For the AC I would try adding some freon. There is a low pressure sensor that won't let the compressor kick in if low on refrigerant. Auto parts stores have kits with a gauge for under $50. Looking at $200 or so to have professional empty and refill.
How to install a forward facing baby seat in 2005 gmc 2500 pickup truck
If you are able to feed the seat belt through the car seat, latch it then using the weight of your body and your knee in the seat push the car seat down and pull the seat belt out all the way until it stops. Once it starts reeling back in it will make a clicking sound letting you know it is locking. Feed all of the slack back into the reel and the seat will be locked into place.
No electricity in left door only
I would look at harness connection above fuse panel in drivers side panel. if the socket has power then check the harness for polarity on all wires.
Freon amount
it could be written on ac compressor itself. it should be around 2.5 or 3 pounds of r134A. or ask to a gm dealer.
Not finding what you are looking for?