20 Most Recent
Questions & Answers
Need master code for radio in a 2000 ml320
Regretfully due to reasons of theft or piracy we do not pass the radio codes here at FixYa. If you contact your local Mercedes-Benz dealer they will give you the 5 digit code. (You must have your registration and know the complete serial number of the radio)
9/15/2021 4:38:27 AM •
2 days ago
I have a 2000 Mercedes
Try disconecting the battery again wait a few minuets make a coffie then reconect this will rest it then try the code again
11/7/2017 8:35:02 PM •
on Nov 07, 2017
99 ML320 brakelights
You will need to trace the circuit to find the problem, so I have attached a source of free wiring diagrams so you can do the troubleshooting, no easy answer for electrical issues like this, just careful diagnosis.
Follow this link.
3/30/2017 11:51:26 PM •
on Mar 30, 2017
How to change starter motor on mercedes ml320
Hello my MB ML320 wont start, only start if I jump it,i change battery but I have same problem it start if I drive for long time but if is park for more than 5 hours it wont start.
1/8/2015 3:32:14 AM •
on Jan 08, 2015
Does anybody know how to test if the starter on a 2000 Mercedes Benz ml320 is getting a signal once you turn the ignition switch? Please Help
If you have a test light and a helper it is quite easy. Clip the test light to a good ground and with the probe end touch the large post on the starter. The light should light as this is the positive battery cable from the battery. Now touch the small post, there should not be anything there, have your helper turn the ignition to the crank position and the light should light while you are still touching the small post. This will tell you that everything is working as it should and that your starter is not working properly. If you remove it and take it to the parts store they will be able to hook it up to a test machine and confirm that it is bad, but you just did that. Either way, you will have your core in hand and not have to worry about paying a core charge and then returning to the store when you are finished with the job.
10/6/2014 2:17:15 AM •
on Oct 06, 2014
Not finding what you are looking for?