2007 Jeep Grand Cherokee Overland - Answered Questions & Fixed issues

Go to google and order the parts. But see if they will ship to Argentina

2007 Jeep Grand... | Answered on Mar 09, 2019 | 50 views

You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV,
owner's/service/repair/parts/maintenance manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..

2007 Jeep Grand... | Answered on Mar 19, 2018 | 361 views

This video link is amazing show you how to actually replace the bulbs on the boards.

I have removed and repaired the radio but have not done the bulbs. The bulbs appear easier than the radio.

Hope this helps? Grand Cherokee Control Unit Light Bulb Replacement WK

2007 Jeep Grand... | Answered on Jun 28, 2017 | 101 views

go to workshop

2007 Jeep Grand... | Answered on Jan 10, 2017 | 698 views

Check it out on you tube !

2007 Jeep Grand... | Answered on Nov 19, 2016 | 53 views

Ask You tube !

2007 Jeep Grand... | Answered on Oct 28, 2016 | 242 views

I have been replacing a lot of TIPM's lately. Basically the fuse panel under the hood. I have done checks for them recently and found it traces back to the main chip. Have the codes read.

2007 Jeep Grand... | Answered on May 29, 2016 | 63 views

OP: Posted by Barbara Frye on May 11, 2016
Barbara. get car serviced? at an ASE shop or dealer?
you cant fix this lacking tools, ill not try to guess.
did you first erase those errors (push reset on tool)?
and see if they return, ???? this is first.
have you had work on the pump/tank area.
in a collision?

here is why.
first check fuses. any blown.?
then do the cluster self test, no tools needed.
posted here 100s of time, need that?, or the free link to the test in the FSM book? posted that too 100s of times here. (ask or search)

next is scan it, see all errors, not just the 2 you see now.
a real scan tool shows all errors and for sure those that might be related, and any CAN-BUS errors.
a real scan tool can see all JEEP extended DTC errors.
also post if the instrument cluster is acting odd. in any way.
does the fuel gauge work? can you tell?
needle steady and correct for reality,

QOD: questions of the day,
does engine run?
does car drive, correctly day and night with bright head lights?
does any other feature of the car fail. any at all.
no charge lamp failures in cluster, nor volt meter below 14v in the cluster meter of same name (volts)???

Theory of Operation
The Front Control Module isn't receiving a fuel volume signal over CAN B from the Cluster Module. The FCM has
to send the PCM a fuel volume signal over CAN C. The signal the FCM sends over CAN C is implausible.
my guess is 1403 is the real error. (primary)
the fuel sender might be glitching,

here is that sensor,
in the tank , part of pump, part of fuel rack. in tank.


2007 Jeep Grand... | Answered on May 12, 2016 | 1,228 views

2007? WK, (i own a 2010 with all docs)
same car.
it dont work at all like a 1993, back in the day of running power through switches to run things.,
or with banks of relays, to fail.
every year,less relays like we did long ago in industry, (pure electronics)
i deleted all my fsm quotes.
it's to wordy.. (but accurate to a fault)
it's now networked + brains (puters),

the network map is below.
if you look at said map, the CAN-BUS network.

is a 2 wire, network for all communications
saving a ton of wire. (times all WK made world wide)
What happens is , you turn the switch
and it has this binary/resistance mux logic in the switch that goes to the SCM brain.

the SCM knows what you did, and converts your actions into a data stream, "a command".
to the can-bus.
it arrives, (if lucky)
to the FCM and the cluster brain CCN. (IP)

the cluster sees that and flashes the click sonic device, and flashes the blinker icon, lamps.
If you can't heare that ,this means the command was never arrived.at CCN.
the FCM hears this command and it in turn drives
the blinker bulbs on the 4 external lamps.

does hazards work, that be first fact to know..
and that FCM fuses, must not be bad.

we scan it next. to see if there are errors
on the can-bus.
or FCM sees garbled data
or CCN errors.
or more.... lots more,
or FCM not responding,

the FCM is over $800 so doing the diagnosis correctly can save a lot of cash.
guessing here can exceed $2000.

here are the can-buss signals, (using my scope)
wanna Gue$$ or Test.?c7b24520-c34f-45b7-b61c-d7988e7e8c8b.jpg

2007 Jeep Grand... | Answered on May 09, 2016 | 103 views

why double post, ?????
ah, but now adds the stud word, ok... same answer
see other post by you.

not with hubs on car, you cant.
take hubs off (non trivial) but did post full fsm pages.
then to a machine shop or any suspension shop in town
and they press on new ones, with a 5 to 20-ton press.
or. just go there and ask them , they will.
in fact, the whole job.

2007 Jeep Grand... | Answered on Feb 25, 2016 | 85 views

a real jeep oem factory part?

2007 Jeep Grand... | Answered on Nov 01, 2015 | 207 views

mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.

2007 Jeep Grand... | Answered on May 02, 2015 | 1,106 views

there are 3000 parts. (7000 page FSM too)
we cant guess what you are doing,?

post a job,
post symptoms.
we cant guess that.
put us on the same page, (context)
please !

2007 Jeep Grand... | Answered on Mar 19, 2015 | 89 views

hello Anon.
battery charged, fuses good, F10 is RR. park
trailer wring hacks? (inspections find that) and collision damage there RR.
does RF work with RR fails>? both ends of car have park and blink.
I avoid Tail word for that one fact.
if you scan the PCM with a scan tool, are there DTC errors.
not scanning makes work 10x harder.!

"rear right tail light and blinkers do not work." both are dead? "and"
then turn off parks and blinks start working?
maybe the parks and blink wires shorted to gether.
what does not work mean, dead, or stuck on?
all key facts in diagnosis. all that.
i have 2007 GC FSm.

there are 4 elements (lamps actual there)
park is seperate from blink , totally.

the MIP module under hood drives turns off sperate drivers.
LF, RF ,LR, RR. so RR is bad. and not related to front like old cars.
park feed
all park lines go to a single point, the park relay 7 output.
so if something shorts to park all parks mess up.
each line has a fuse. so each can die by self.
There is only 1 park relay #7

so my question is, do any other park lamps mess up.
you said the blinks and parks (tail) do not work.
so? what about all park lamps. side and front.

if only RR fails, no other symptoms, i concur, bad ground. there.

a volt meter can measure bad grounds
with wire to battery neg,
and red meter at ground on lamp base.
if not 0v, or less than (0.5v) a 1/2 volt, its bad.

2007 Jeep Grand... | Answered on Mar 04, 2015 | 2,826 views

USA car or export, got trailer hitch options>?
front or rear mess up,
which end of car messes Up????????
say what stays on means, stuck blinking, or glows solid?
Do hazards mode fail too.>???
got trailer wiring hacks, or collision damage? (look)
Hitch jack pin 4 shorted? got factory hitch option or Uhaul hack job.
now lets do the overall view
the Module integrated power, (very expensive)
has 4 outputs for all blinkers on car, (independent)
one for each corner of car, and more if export model ( is it?)
so one hopes that MIP is not bad. $$$$
Module Integrated power (MIP for short)
it is a computer too.
so did you connect a scan tool and look for DTC errors related to BLINK(turns./Hazard)
it gets commands from the turn switch, if the turn switch works,
its ok (off it's off, & on it blinks or stick on front and or rear)
so if that is all true then the left side is bad. (front or rear? )
but you never said , front or rear.
so my answer is, replace all lamps on LEFT END OF car, that fails.
lamps can short if hug brass metal base lamps.
if new lamps fail,, then the wiring is bad, based on cost of IPM
check wires very carefull on end of car that fails.
and at hitch wires, or if had a hitch and some one hacked it in
or hack jobbed it out. (shorts)

that is it, 07 GC.

2007 Jeep Grand... | Answered on Feb 07, 2015 | 92 views

post code, DTC with scan tool
we cant ever guess codes.
mine a 2008 has like 1000 codes.

2007 Jeep Grand... | Answered on Feb 03, 2015 | 138 views

There are several different things that could make it misfire ! not just plugs ,does it have plug wires or is it coil on plug coils. Could have a coil breaking down. Does it do it in all driving conditions ? Idle , cruising speed ,under a light load and what codes .po300 random misfire or a specific cylinder misfire code ? P0306 cylinder #6 etc.

2007 Jeep Grand... | Answered on Jan 12, 2015 | 596 views

-Possible causes are Faulty Idle Control System motor
- Idle Control System motor harness is open or shorted
- Idle Control System motor circuit poor electrical connection
- Faulty Powertrain or Engine Control Module
- Vaccum leaks or damaged hoses or improper routing check for vaccum leaks first if this was helpful please leave good feed back

Read more: http://engine-codes.com/p0505_chrysler.html#ixzz3Mq1J8Bho

2007 Jeep Grand... | Answered on Dec 24, 2014 | 123 views

Check on your motor you have some where a place how you have your number of your celynder

2007 Jeep Grand... | Answered on Dec 03, 2014 | 235 views

Not finding what you are looking for?
2007 Jeep Grand Cherokee Overland Logo

329 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides