20 Most Recent 2007 Jeep Compass Limited Questions & Answers

The WPR fuse is for the wiper and washer system. It is a 25 Amp fuse that powers up the WIPER HI relay, WIPER relay, and the WSH relay.

2007 Jeep... | Answered on May 17, 2020

Have a jeep patriot had a few issues with engine light coming on, took and had new sensor fitted stayed off a few days. Car shudders and jolts at low revs when accelerating sometimes and my mpg was at 25 around the town but now 18 maximum, need some help regarding wether it's worth taking back to have the light cleared to come back again! Worth a car battery reset? Also have a dodge petrol cap, takes ages to fill up stops every 50p of fuel, could this be the engine light problem or is their a separate light for that, any advice would mean the world regards

2007 Jeep... | Answered on Dec 10, 2019

here are some youtubes on how to do this pick one that looks like you can follow and see if it works out for you. it sure looks like it will be a job. good luck on this job.

https://www.youtube.com/watch?v=y_Lgi7xjFIs https://www.youtube.com/watch?v=Z4vTZgh48AU

2007 Jeep... | Answered on Sep 05, 2019

Thank you Crip. I had the same problem with my 2007 Jeep Compass. Pulled the rubber hose back between the door and main body to find a broken wire! All sorted now, windows working fine.

2007 Jeep... | Answered on Oct 25, 2018

Code translates as :-
P1729 = Transmission Ratio Control Circuit

2007 Jeep... | Answered on Jul 14, 2018

there are 2 pumps in your tank. are you sure it isnt frozen??

2007 Jeep... | Answered on Dec 27, 2017

Fuel pump loose or dying.

2007 Jeep... | Answered on Oct 30, 2017

Don't know where you found those DTC'S , but they are not OBD 2 codes . DTC's come with a letter in the front of the number > P- for powertrain , engine , transmission . B - for body DTC'S - lights - C- chassis ABS . Trouble Codes

2007 Jeep... | Answered on Mar 18, 2016

It will be the black one. If you do not have different colored cables then look at the battery. There will be a negative sign embossed on the battery itself. You will also notice that one terminal is usually larger than the other.

2007 Jeep... | Answered on Jan 21, 2016

It is probably your button. Pretty easy to replace and verify. If you take it out and cross the wires to open it, and it opens, then you know for sure it is the button.

2007 Jeep... | Answered on Jan 21, 2016

Depending on the year, it is either a 32mm or 36mm. Most likely 36mm.

I’m happy to assist further over the phone at https://www.6ya.com/expert/nathan_cc888cf971f43e78

2007 Jeep... | Answered on Jan 19, 2016

wow, 3 fans in car and we get to guess,why.?
first what are you doing.? (guess,i want cab heat to blow?)
parked key off?
hot engine wanting heat from HVAC vents
? what?
or under hood and radiator fans are dead but overheated.

HVAC is a blower fan,or blower, the fuse is called blow.
does blower sound ok on high???? SouND?
if yes (if no controls are bad)
is air flow weak. yes. that is dampers failing
both the blower and dampers and heater core are in the center
tor right(usa) of dash in hugh black box.
first check fuses
then scan the car. yes, you must scan it see HVAC errors
or its all just a waste of time..

some models have filter and packed up ,my block air flow
some have it others dont,. not fun finding it.
most are behind glove box (after removal)

2007 Jeep... | Answered on Jan 19, 2016

it smears or is dead.
working means many things.
both or one? or ?
if dead.
check fuses first. all the time , for all electrics. and EFI

2007 Jeep... | Answered on Dec 29, 2015

English please,
and engine size? is there are 4 engines used.

what is Seme in spanish.?

2007 Jeep... | Answered on Dec 26, 2015

How tight did you make the nut holding the bearings onto the spindle? Did you change the bearing races too? Recheck the torque values to see if they are correct. an old race on a new bearing will cause temperature problems.

2007 Jeep... | Answered on Sep 30, 2015

fuse 23 blown? is car battery discharged? (other symptoms not stated ?)
my guess is you can't see the horn, and the bolt?.
but can't reach it? that it?

That is correct. the relay is buried deep inside the TIPM where I only go...and others ,not shy...
im not so daft to replace a whole, TIPM for a bad relay or driver. for any horn... but you can....
it is your cash.
MP(49) schematic. is clear. as day.
well was before fixya blurred it.

1: is horn ground rusty? (look, examine...)
2: does 12vdc reach horn , honking (a voltmeter tells you this)
if #2 fails the PCM must be scanned to see why.
a must. scan it NOW.
B2336? B2338 (horn not grounded)
b2371 is shorted horn
like that?

if there is DTC that says the horn driver is bad, it is... end story. well, not doing the bad story.
and swapping in new TIPM.'
or reprogramming scrambled is dealer only fix.24982994-etvqydtva0wxu40xhy30x2n2-1-2.jpg

2007 Jeep... | Answered on Sep 06, 2015

My suggestion is to check the wiring harness and connection. check fuses and relays, most likely you will find a simple wiring problem.

2007 Jeep... | Answered on Aug 18, 2015

vapor recovery tube is clogged,(vent tube,next to fill tube)

2007 Jeep... | Answered on Jul 15, 2015

Not finding what you are looking for?
2007 Jeep Compass Limited Logo

420 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Compass Jeep

  • Compass Jeep

Most Popular Question

find list dtc codes

  • Cars & Trucks