20 Most Recent 2007 Subaru B9 Tribeca - Page 7 Questions & Answers


Common cause is a incorrectly tightened gas cap or defective pressure relief valve or seal in gas cap. Also a faulty purge valve or wiring to it and other small leaks. Go to the link for more info..

Subaru Cars &... | Answered on Apr 17, 2020


Car is not recognizin device..may need to flash computr. First unhook batt a fewmin w it installd then reconect and start car n let it relearn

Subaru Cars &... | Answered on Apr 17, 2020


https://www.youtube.com/watch?v=sDib7zW00Vk

Subaru Cars &... | Answered on Mar 21, 2020


you should be looking for a short to ground on the wiring that runs to the pump. 20 year old car it is very possible thats your problem.

Subaru Cars &... | Answered on Mar 15, 2020


Space saver wheel is reckoned safe and legal to take a car at greatly reduced speed to the nearest place where the puncture can be repaired or the tyre replaced. It is worth noting the recommended pressure and maximum speed is engraved on the sidewall of the space saver tyre, which is only suitable for normal road surfaces.

Subaru Cars &... | Answered on Mar 03, 2020


Little point assuming it should work without some meter work to ensure it is not only receiving power but is drawing enough current for it to become hot enough quickly enough for deicing duty.
I don't know how much current that should be but I expect 20 - 30 amps would be realistic, maybe more.

Subaru Cars &... | Answered on Mar 03, 2020


https://www.quora.com/If-a-power-generator-is-running-but-no-voltage-is-produced-what-could-be-wrong-and-how-could-it-be-solved

Subaru Cars &... | Answered on Mar 03, 2020


Could be a sensor ,but your best bet is to have car scanned for transmission codes

Subaru Cars &... | Answered on Nov 18, 2019


The issue appears to be associated with the accident.
That should not break the radar unit. It would realign the antennas, maybe damage an antenna or wiring or connector.
That is where I would look. Since you already replaced the radar unit part and bumper, that is about the only thing left. Check the wiring carefully.

Subaru Cars &... | Answered on Nov 07, 2019


The camera has been bumped out of place. To set it right. Put your emergency brake on and block your wheels. Then put your car in reverse so your camera comes on. From under the car you should be able to adjust the camera to the right position.

Subaru Cars &... | Answered on Oct 17, 2019


It shuts down when there's a trouble code stored. Get the trouble codes read

Subaru Cars &... | Answered on Oct 07, 2019

Not finding what you are looking for?
2007 Subaru B9 Tribeca Logo

97 questions posted

Ask a Question

Usually answered in minutes!

Top Subaru Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tribeca Subaru

  • Tribeca Subaru

Most Popular Question

subaru 2007 b 9 keeps blowing 20 amp

  • Cars & Trucks
Loading...