XC-70 (typo) YES.
ALL CARS MADE, FOR SURE LAST 20 YEAR.
HAVE FULL SERVICE MANUAL THAT COVER ALL THAT AND 1ZILLION MORE TOPICS. ALL DO
older cars too, but are weaker before manuals were in digital form.
for sure 2007!
you posted with not country,
and what engines is actually there.
ours USA is. 2.5L L5 engine and 2.4L
has x6---- O-RINGS here.
in, inch/lbs, Divide by 12 to get foot/lbs
a diagram what? a VC?
not sure what that means , and all that is in the SM service manual.
CAN I ASSUME, you need all 10 steps in the manual told to you?>
- Before servicing the vehicle, refer to the Precautions Section.
- Remove intake manifold. Refer to Intake Manifold removal and installation.
- Remove spark plugs from:
- Cylinders 1 and 5-5-cylinder engine
- Cylinders 2 and 5-6-cylinder engine
- Install two camshaft cover press tools 999 5454 into the vacated spark plug holes. Ensure that the bolt in the spark plug well is fully tightened 22 ft. lbs. (30 Nm).
- Remove Variable Valve Timing (VVT) solenoid.
- Leave a 0.079-0.118 inch (2-3mm) gap to the camshaft cover when installing the press tools 999 5454
- Remove all bolts securing the camshaft cover to cylinder head.
- Use pliers 999 5670 to lift camshaft cover from cylinder head.
- Install pliers at the stop lugs. Start with cylinder 1 and work alternately backwards.
- Slacken off the wing nuts approximately 2 turns.
-
- Repeat the procedure working toward rear of engine.
- Carefully press out the front and rear camshaft seals.
- Remove the two press tools 999 5454 from spark plug holes.
- Remove the camshaft cover.
that?
the install is more complex , including sealants.
and
tighten the bolts in sequence from the center and outwards to 88 inch lbs. (10 Nm).
and
- Install:
- Variable valve timing (VVT) solenoid. Use a new gasket. Tighten center bolt to 89 ft. lbs. (120 Nm), center plug to 26 ft. lbs. (35 Nm)
- Spark plugs and tighten to 22 ft. lbs. (30 Nm)
- Intake Manifold, refer to Intake Manifold removal and installation
and more, read the manual.
RTM
https://eautorepair.net/Marketing/Default.asp
.