2007 Volkswagen Citi 1.8i - Answered Questions & Fixed issues
I have a Citi Golf and its cutting out. Its
Hi i need help my mk1 golf carb starts and idle fine but as the car idle and enjin is getting hot then she just jerk and cut out then start it again it starts fine but idle for aboutfew sec then cut out again..i unplug the temp sensor problem remain petrol filter new new plugs and plug wires new boch distributor...plus 1/2 tank of feul...what els can i try any help..can this be electrical problem or what all my fuses checked and is fine any help pls
What causes a rattling noise from my front
Wheeles
i used to drive a mk2 golf but now drive a mk1 and i had the same problem, especially when am turning. with my case when i had the rattling problem the cv joint boots needed to be replaced as they were worn out. that is one possible answer to your question. if youre DIY guy you might wanna check that out or go to your mechanic and he might tell you the same thing.
I converted a 1.8 carb mk1 golf to a 2l ady and
You can find help with sorting out pins for your swap by going to "vwvortex.com". Go into technical VW & Audi and go down throught the list to 2 liter engines or posibly 16V. Hope this helps.
How is my vw mk1 going to sound when I take out my
like a dustbin ,if you remove the silencer it will run rough and lose the fuel economy the first silencer ?? does this vehicle have a cat all europeon cars from 92 were cats so this first box could be the cat .Also it will not pass the annual mechanical inspection and you could render yourself liable for a fine and points on licence for a noisy vehicle
Citi golf 2006 1.4 cut the engen when is raining
Water ingress into the wiring. Try a water repellant such as WD40 and spray the engine bay wiring. Especially in the area of the Distributor and Ignition Coil. Make sure it isn't a water based spray!!
Car won't start
Sounds like a earth problem, check if the connection from the negative terminal is connected to the body of the car, sometimes the copper starts to rust inside the lug, check that the earth running to the engine is also soundly connected. Does the heat gauge needle jump around while driving?
HOW TO CHANGE TIMING BELT
A VW i think but without model and year i cannot help ,also is it a diesel or a petrol engine ,but it could be electric version??
My 2007 vw chico 1.4 lost power after cam belt change
you have a wrong timing fit. might out a tooth on camshaft and that's the reason you have noisy revs. be careful do not force it because you will bend valves. take it back to the garage for second check. Happens sometime.
Not finding what you are looking for?