20 Most Recent 2006 Toyota Hilux 2.0 Questions & Answers

NO YEAR? scans good, no stored or pending DTC codes>???????? dirty MAF, (if MAP EFI, clogged map port?) low fuel pressure>? bad need of simple tuneup?

Has the Transfer case fluid ever been replaced/changed? If not do so it may be sticking from dirty fluid.

Here are the torque specs you requested: MAIN BRG CAPS= 29FT/LBS THEN TIGHTEN AN ADDITIONAL 90 DEGREES in sequence(two step process) ROD BEARING CAPS= 18 FT/LBS CYLINDER HEAD BOLTS= 29FT/LBS + 90 degrees + another 90 degrees in sequence from the center out ward, (3 step process). Please let me know if you have any questions. Always happy to help.

When a battery is replace there is a possibility that certain elements of the CPU program become corrupted. Try using a scanner to reset the CPU program in the ECM to see if that turns on the immobiliser section.

Have you tried at the rear of the cigar lighter panel?

If the valve is good you can reuse. Check the compression Correct the timing chain

its really a 2TR-FE engine, true name, and knowing that name allows you to google and find this all out fast. all cars, all engines, get true name then search. in usa its used on the Tacoma. so lll uses that.(risky) ok i had to use 2010 Tacoma and bang the 2TR it has special gasket packing sealant, read that yet and 67 steps here is step 5? excerpted. I MAKE no CLAIM or 2TR is like YOUR TR. not now or ever. the page shows 29Ft/pounds. but is not just set there. RTM. read the steps. commentary. and quotes: GOT TTY bolts.? here is my wiki quote. that shows just how complex the simple word Hilux means. USA: (mind bending, marking BS) the Hilux name was retired in 1976

no car model or year stated, if you log in to alldata.com, its there. but i cant because you failed to even state what car what year.?????? this is covered in the Toy FSM> and at alldata.com. log in and answer car and year.