Top 20 2006 Toyota Corolla Verso Questions & Answers

Hi, I seem to have the same problem with my Corolla verso 2004. The steering lock doesn't disengage and the car won't start even though the immobiliser light stops flashing. Have you managed to get it sorted? Thanks***** Update**** In the end I did manage to get my problem fixed. It had nothing to do with the key. The problem was a faulty connection in the immobiliser motor that sits on the steering column, It wouldn't disengage. Our mechanic checked and repaired the motor and now the car works fine. It's a very rare fault apparently.

did you leave or mess with mass air flow sensor

if its black smoke then its a fuel problem too much fuel the car can`t burn it . could be fuel injector over fueling. if its white smoke then its burning coolant, there is a head gasket problem that is damaged in the cyl #3 area. it could also be a bad valve guide/valve seal, oil rings, compression rings. you don`t say what colour the smoke is.

double posted. backup one.

Start with a major tune-up, then replace the fuel filter, then verify fuel system pressure and correct any fuel delivery issues.

recode (re program) FOB. the operators guide covers that, did you lose that?"glove box ,day 1" get one at the dealer and read that page. on some cars you need 1 fob to make 2, my car takes 2 to make a 3rd. no matter what, read the manual. do what it says to do , there are no fooling it. did you look at toyota.com for opr guides, for free, did you? if not do so. i can look it up for you but am lazy now....

dirty sensors in each wheel and dirty pick up in each wheel .

It's stamped under the hood probably on the firewall or one of the front fenders

Question edited for clarity. Question moved to model category. https://www.google.com/search?q=Toyota+5afe+Main+bearing+torque+spec ..

Not good. https://www.google.com/search?q=TOYOTA+COROLLA+RUNX+cam+and+crank+sensors+have+no+power You need an auto-electrical specialist with a pro grade scan tool computer. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

Question edited for clarity. All question need FULL 'year make model;' as first 3 words. Question moved to Toyota Corolla. There are over 40,000 categories to choose from listed by 'make year model'.

Car Shuts Off While Driving: 7 Reasons Why and What To Do

Car From Japan https://carfromjapan.com > Car Talk > Maintenance Tips Jun 13, 2023 - This happens when the engine is very sensitive at idle and can be caused by many things, but the most common reasons are a faulty throttle body ... The easiest way is to find a local auto electrician. A professional grade scan tool computer can diagnose the fault by recording what happens when it cuts out. https://www.google.com/search?q=auto+electrician+near+me ..

Question edited for clarity. Question moved to model category. Engine immobilizer. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

Question edited for a lot more clarity. Question moved to 'make and model' for the engine. No that is the last thing it is likely to be! It was working before, why would it fail because you changed the valves? Did you carefully lap the new valves with grinding paste to make sure they sealed? Are they all opening a closing. Is the gap correct? Can you do a compression test?

The 3 Most Common Toyota 1ZZ-FE Engine Problems

TuningPro https://tuningpro.co > the-3-most-common-toyota-1zz... Jun 21, 2021 - Power loss; Poor engine operation. Excess oil consumption is generally anything over 1 quart per 1,000 miles. As oil blows-by the piston rings ...

https://www.google.com/search?q=2e+engine+blows+oil+into+air+filter ..

OK, so they do work, just not when using low beams. That indicates something to do with the headlight switch itself. It controls all lighting and could have an issue when low beams are turned on preventing the gauge/console lights from working. The switch is available aftermarket, I checked on one without fog lights on eBay and found one for around 33.00 shipped free. Pretty easy to replace, just remove the covers on the steering wheel and it's plug-n-play. Best of luck:)

Question edited for clarity. Question moved to model category. It appears to be a known issue on this diesel version. https://www.google.com/search?q=2007+Toyota+Corolla+d4d%2C+won%27t+start+after+replacing+glow+plugs ..

Sounds like piston blow by, as the gap increases and diesels have such high compression. When the turbo kicks in, the pressure is restored. https://www.google.com/search?q=Toyota+Corolla+2+Litre+diesel.+Why+loss+of+power+at+low+revs+when+warm ..

When was the vehicles last full service ? have the OBD scanned for any fault codes also

Replace all the screws and put it back. https://www.google.com/search?q=toyota+corolla+dashboard+replacement ..

Has the OBD codes been read ? If not i'd have that done and any codes will need to be deleted so you get a reading from the replaced parts