20 Most Recent
2009 Proton Savvy 1.2 Questions & Answers
Proton savvy problem
proton savvy ...good little car but often wont start ...turns over , no start ...llock it ,eave it , come back will start . when doesnt , kick the clutch pedal in hard 2-3 times ...neutral start switch may be sticky .. put into neutral , depress clutch & brake ...then started !
Proton savvy 1.2 runs for a while then stalls
hi,
savvy engine is same with renault engine. there's a flywheel sensor/engine speed sensor between engine and gearbox. change the engine speed sensor.
The engine speed sensor is control the ignition timing, if the sensor can't read the 0' angle the engine won't fire up.
Hi..
i have a trouble erase dtc at scanner
The DTC are historical and current added together. Usually, ABS gives fault if the wheel sensor could read the tyre rotation correctly. This happens when there is dirt on the sensor or the wheel bearing are degraded and makes the wheel wobble a bit. get the wheel bearings on the wheel that is indicated by the error code.
Headlamp
First unplug the connection at back of headlamp.. Twist headlamp bulb assembly counter clockwise pull it straight out..with rubber gloves on open new bulb pkg.. Try not to touch the new lamp to anything.. The oil from your hands or grease severely shortens life of new bulb.. Tip : if you already opened pkg.. And touched it.. Or get it dirty trying to install it.. Stop and clean it with isopropyl alcohol and wipe with a clean dry rag:)
Not finding what you are looking for?