20 Most Recent 2010 Peugeot 206 SW Questions & Answers

0helpful
1answer

Number 15 fuse keeps blowing

Possible causes: - Fuse is under rated. - Short circuit in wiring. - Fuse No. 15 is overloaded. - Positive wire is shorted to ground. - Check all the loads one by one which are put on this fuse.
4/25/2014 8:29:08 PM • 2010 Peugeot 206... • Answered on Apr 25, 2014
0helpful
2answers

How do I get the bonnet open on my Peugeot 206

there is a lever by the inside of the passenger door by the footwell pull this back to release the bonnet then stick ur finger under the bonnet to open the catch
11/15/2021 1:09:43 PM • Peugeot 206 Cars... • Answered on Nov 15, 2021
0helpful
1answer

2007 1.4l hdi. Where is speed sensor?

The engine in the Peugeot 206 1.4 is a KFU 16 valve engine. ... The camshaft sensor is located to the rear right hand side of the engine
5/22/2021 2:43:58 PM • Peugeot 206 Cars... • Answered on May 22, 2021
0helpful
1answer
0helpful
1answer

K Reg. How can I fix central locking problem?

do you have any lights ?
4/27/2021 1:57:41 AM • Peugeot 206 Cars... • Answered on Apr 27, 2021
0helpful
1answer

How do i get to fan resistor on peugeot 206 2006. I need this fixed like yesteryear due to the fact that everytime it rains my windows get fogged up and of course i cant see.

you can try out some guide from here reliable-store they also provide live chat feature for instant help and it's very useful
9/23/2019 2:44:02 PM • Peugeot 206 Cars... • Answered on Sep 23, 2019
0helpful
1answer

On my peugeot 206 2006 , why does my gear thingy keep falling off to the point where it is non drivable?

you can try out some guide from here reliable-store they also provide live chat feature for instant help and it's very useful
9/23/2019 2:36:24 PM • Peugeot 206 Cars... • Answered on Sep 23, 2019
0helpful
2answers
0helpful
1answer

P1327 ignition intergrated phase detection

Hola buenas a todo aquel que ve este problema que tengo ( tengo un problema con una hyundai Tucson modelo: 2009 cilindraje : 1.991 ) : me presenta tres c?digos de falla los cuales son ( p1327 - rel? de incandescencia abierto ) ( p0405)( p0562)(p1190) esos son los c?digos en los que eh estado trabajando * pero a?n no doy con el da?o del veh?culo , si me pueden ayudar se lo agradezco ? Ya que eh probado otra pcm revisado todo el ramal del motor asta los soquer de la pcm cambiado todo los censores. Y actuadores de precion de combustible. Y nada
8/17/2019 6:01:50 PM • Peugeot 206 Cars... • Answered on Aug 17, 2019
0helpful
2answers

Fuse box diagram peugeot 206

Check the website below:

Peugeot 206 Fuses.
7/2/2019 9:11:59 AM • Peugeot 206 Cars... • Answered on Jul 02, 2019
0helpful
1answer

Main fuse on peugeot 206 -

inside power distribution box under the hood!
3/18/2019 10:16:37 PM • Peugeot 206 Cars... • Answered on Mar 18, 2019
0helpful
1answer

Main fuse on peugeot 206

You can try out some guide from here reliable-store they also provide live chat feature for instant help and it's very useful
3/12/2019 9:53:43 AM • Peugeot 206 Cars... • Answered on Mar 12, 2019
0helpful
1answer

Where is the main fuse of peugeot 206

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few reliable-store .. let me know if u need help thanks
2/27/2019 5:18:06 PM • Peugeot 206 Cars... • Answered on Feb 27, 2019
0helpful
2answers

I have a Peugeot 206. One headlight isn't working. I've checked the bulb by putting it on the other side. The connector also seems ok. What else could be causing the problem ? Grateful for any help.

If you are positive that the bulb and connector are OK...then there could be several root causes: Bad wiring: There could be a short somewhere between the connector and fuse/relay or ground. But you need to figure out first ... is it BOTH the high and low beams that are out on that side of the car? I think your bulb has 3 spades for a combination high/low beam bulb. Knowing which line is dead helps on figuring out which wire(s) is the issue. If both high and low do not work ... then it is the ground wire. If you have a voltmeter you can test out the wiring. Bad Light Control Module (if your car has this; I could not confirm) I am not sure if the Peugeot has a light control module but on some Saabs there is one and it caused your same symptom. Read link to learn more http://saabworld.net/showthread.php?t=29583
1/23/2019 7:58:33 PM • Peugeot 206 Cars... • Answered on Jan 23, 2019
0helpful
1answer

I need to know how to remove & iinstall the passenger seat side airbag in 2003 peugeot206cc.

Not familiar with that particular model, but on most you must first remove the seat back and seat cover to access the airbag.
6/7/2018 1:58:36 PM • Peugeot 206 Cars... • Answered on Jun 07, 2018
0helpful
1answer

Peugeot 206 engine vibrating, misfiring, erratic revs fault code p0563

Did you get the car plugged into a diagnostic reader after the battery change? Some newer car ECU's need to be reset to 'new battery' settings. Over time the system alters the battery charge rate as the battery gets older and weaker so a new battery will overcharge if not reset.. The error code, (P0563), reads as "system voltage high". Get the car plugged into a good diagnostic system and that will allow you to correct the error code and battery settings. The other symptoms may settle down once the error code is sorted out.
4/14/2018 10:19:53 PM • Peugeot 206 Cars... • Answered on Apr 14, 2018
Not finding what you are looking for?
2010 Peugeot 206 SW Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7005 Answers

Mike

Level 3 Expert

4379 Answers

Tim Whalen

Level 3 Expert

3076 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

206 Peugeot

  • 206 Peugeot

Most Popular Question

number 15 fuse keeps blowing

  • Cars & Trucks
Loading...