20 Most Recent 2003 Peugeot 206 - Page 2 Questions & Answers

Search for reviews at carsurvey.com.

Have a look in the Peugeot 206 Manual for the Fuse Panel. This will give you the Fuse layout and where to find it in the car.

Should not be too difficult if the axle fittings are the same. You can use the brakes without the ABS. Don't need to change anything on the brakes. Just leave the sensors unconnected. If you want ABS the you will need to obtain all the components, ie manifold, lines, sensors on all the wheels and possibly a computer for the ABS.

dont think so... just the horn.

check your sway bar and sway bar connecting links, ball joints, inner and outer tie rods and don't forget to check tire pressure and do a complete check for any broken suspension parts front and rear of vehicle

yes jack car up remove drivers wheel then remove arch liners to access area you will see the horn it might be a twin one simply remove as a whole or split them if it is a twin hope that helps

What's kind of noise and is it coming from the body or the engine? As far as the jerking may need a front end alinement or new struts

When a Bulb starts to flash fast, it is normally indicative of a Burned out Bulb..