2007 Peugeot 206 1.4 - Page 3 - Answered Questions & Fixed issues

Top strut mount

As the engine light came on there should be a fault code stored in the memory that should provide a clue. When searching for whistles and other noises listening through a piece of hose can be a helpful way to pinpointing the source.

This can be caused by a vacuum leak or a sticking idle speed control valve or a warped throttle valve, I have seen all three problems

Check you have power at the motor , and work back from there

if its the cylinder head torque it down to about 55 ft pound in two stages

No drivers handbook? get one from ebay or google images for a pic of fuse box

Good Day , i hope you can help me, first of all i have absolutely no knoowledge of cars, i have a 2001 pegeout 206cc 2liter. so the problem is simple i hope, my air con goes on fine all lights show etc but it doesnt blow anything, i have checked fuses and all seem to be perfect, i cant find anything online showing me where i need to get my hands dirty to fix the issue, what could the problem be? the main fan by the radiater hhas that little fuse with a grid typr thing around it which i assume controls the level of the blower that also works fine, and its located in the front grid exsposed to everything like water dirt etc, the main issue is it does not blow, and when i turn it on i can hear some sort of click sound, also i dont know where to check the gas? if there is no refridgent gas will the blower still work? does anyone know what i can do or just give me a few steps to try, thank you Luke

Has it been serviced recently if not I would suggest this first. Also if its running too rich, could be the EGO (lambda) sensor, although I would have thought running a diagnostic would flag this if it was.

maybe the motor has gone.

Losing water, you mean coolant right? If so and you have had the cooling system pressure tested and no leaks are present on the outside of the engine then you most likely have a leaking cylinder head gasket.

would need to read it to know the problem ,you havent stated if its a petrol or diesel ?

Spray a carb cleaner on it and work by hand for starters.

Gas or diesel?

I don't think you can on that model. Alot of JDM does not support ENGLISH. even if you do the navigation may not be usable or up datable for outside Japan and if you are in N. America the radio station stepping is different. Probably be easier to replace with a unti designed for your market and sell that unit back to someone in japan.

You Peugeot dealer can supply the code based on the VIN number of your car. Each car is different hence you wont be able to find one on the internet. You may need to visit them to prove you own the car, and they may charge a small fee, but many will provide it for nothing. Then write it down for next time.

Crankshaft position sensor bad.

From outside or inside?

34 PSI

What does this sensor do because I can find no reference to such a part.

Defective radio.