20 Most Recent 1998 Mitsubishi Space Runner Questions & Answers


Check for fuel pressure before you do any further ,must go phone ringing

1998 Mitsubishi... | Answered on Jan 07, 2014


When the E-brake is released, the handle bumps against a button that turns the power off in the dash. Follow the E-brake handle down the mount and locate the button or switch and make sure it has not gotten disconnected somehow.

1998 Mitsubishi... | Answered on Oct 03, 2013


check your brake fluid level its often on the same circuit and will leave the light on if its okay it could have a sticking or faulty level sensor if that's ok the handbrake switch as you say is simple it just earths out when the handbrake is left on if it stays on when unplugged it may be trapped somewhere and shorting to earth

1998 Mitsubishi... | Answered on Sep 26, 2013


Good luck with that! If you can find for free, what we professional auto repair technicians must PAY for, please let me know. I need to find free service manual downloads so I can reduce my monthly service information costs.

1998 Mitsubishi... | Answered on Jun 16, 2012


A scanner will reset the light, But the problem needs repaired first or it will not reset.

Mitsubishi Space... | Answered on Nov 16, 2014


i'd want to know why it's ON , get the OBD codes read and these will tell you the sensor/switch or circuit causing this issue

Mitsubishi Space... | Answered on Nov 15, 2014


A scan tool is still required to clear the SRS light

Mitsubishi Space... | Answered on Nov 14, 2014


What country are you based in? Most Good auto parts stores and websites should stock a part that will match or replace this unit. Take it with you to an auto electrics specialist and they should be able to source one even if you have to get one from overseas.

Mitsubishi Cars... | Answered 2 days ago


Is the immobiliser disarmed?

The days when a fuel pump was supplied direct from the ignition circuit is far behind and for many years added safety has been built in because should there be a leak or a broken pipe things could become rather warm. I suggest you check the fuse(s) first.

Somewhere in the electronics of your car there will be a device to manage the fuel pump, to switch it on when required and to monitor the current consumed and switch it off if the current rises or falls outside the parameters. Where it is and what it is I can't help you with but if it isn't the fuse and there is no break in the supply wiring, that device is probably the culprit.

As always, serious troubleshooting of computerised vehicles should only be done with reference to a wiring diagram.

Mitsubishi Cars... | Answered on Oct 19, 2020


Deatra: Here is a link to your factory repair manual for you car. Click or copy and paste the link and it should have the answers your looking for. Hope this helps you.
tearstone.com/2006-eclipse-factory-service-manual/

Mitsubishi Cars... | Answered on Oct 06, 2020


Normally, Yes they can be. It all depends on the actual problem you are having. Why do you need it re-programmed? If a total reset is needed you'll have to pay dealership prices for it.
Some independent Tuning companies can alter the settings in the PCM to alter the performance of the vehicle, sometimes known as getting it 'Chipped' or 'Mapped'.

Mitsubishi Cars... | Answered on Sep 29, 2020

Not finding what you are looking for?
1998 Mitsubishi Space Runner Logo

Popular Tags

13 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Space Mitsubishi

  • Space Mitsubishi

Most Popular Question

am new car like know maf sensor

  • Cars & Trucks
Loading...