1995 Mitsubishi Pajero 0.7 - Answered Questions & Fixed issues

at the rear of audi. with a big connector

refill the gas in the air con compressor and check for leaks....

Most cars or trucks have the firing order stamped on the engine its self.

replace the injector tips as they are squirting and not atomising. They will also be dribbling and that is allowing fuel in before the injection time

check battery connections or flat battery

It sounds like you need an auto electrician, but check that fuse for the windows.

Mitsubishi Pajero / Shogun (V80; 2006-2017) fuses

Fuse Box Diagrams https://fuse-box.info > mitsubishi > mitsubishi-pajero-... The fuse box is located in the instrument panel (driver's side), behind the cover. The location of the fuses in the passenger compartment: Mitsubishi Pajero ( ...

Mitsubishi Shogun / Montero (2003-2006) fuses

Fuse Box Diagrams https://fuse-box.info > mitsubishi > mitsubishi-shogun-... Fuse Box Location ... The fuse panel is located behind the cover in the instrument panel. Pull the fuse box lid to remove it. Use fuse puller to remove the fuses. ..

It is a well documented issue on that vehicle. https://www.google.com/search?q=1999+Mitsubishi+Pajero+IO+keeps+burning+the+coil+plugs ..

Yes, there is a fuse for the super select lights on the dash in your 2002 Mitsubishi Pajero Limited Edition. The fuse is located in the fuse box under the hood. The fuse box is labeled with a diagram of the different fuses and their corresponding amperage ratings. The super select lights fuse is typically labeled as "F11" or "11" and has an amperage rating of 30. If the super select lights on your dash are not working, it is possible that the fuse is blown. To check the fuse, you will need to remove it from the fuse box. If the fuse is blown, it will have a broken metal strip running through it. To replace the fuse, simply insert a new fuse with the same amperage rating into the fuse box. Once the fuse is replaced, the super select lights should start working again. Here are the steps on how to check the fuse for the super select lights on your 2002 Mitsubishi Pajero Limited Edition: Locate the fuse box under the hood. Open the fuse box cover. Locate the fuse for the super select lights. Remove the fuse from the fuse box. Inspect the fuse for a broken metal strip. If the fuse is blown, replace it with a new fuse with the same amperage rating. Close the fuse box cover. Turn on the super select lights. If the super select lights are still not working after replacing the fuse, there may be a problem with the super select lights themselves or with the wiring. In this case, it is best to take the vehicle to a qualified mechanic for diagnosis and repair.

NO YEAR CAR TOLD NO COUNTRY NO ENGINE, NOT TOLD GAS OR DIESEL EITHER? seem the throttle cables are jammed, rusty. kinked or just too old now. or IAC VAVLE STUCK OPEN OR TB, VALVE INSIDE IS ALL GUNKED UP AND NEVER SERVICED (CLEANED) TB = THROTTLE BODY.

Check overdrive relay. Its far left front in the glove compatmet.Its not going into overdrive. I had same issue went to left side of gearbox located od slonoid and rewired it.

Question edited for clarity, add maker, add a few CAPS. Question moved to correct category. Check compression on all cylinders.

Pajero 3.2 engine power loss problem solved!

https://mitsubishiforum.com > ... > PCM & Fuel Systems 3 posts · 2 authors Valve stuck in half opened position. I completely disassembly valve and clean axis. You need pull out valve axis completely and clean both parts, valve body too ...

Connect a Code Scanner to the OBD2 port. It will tell you the problem by giving you a code.

Distributor https://www.google.com/search?q=2001+v6+pajero+glx+distributor ..

https://www.fixya.com/cars/t25888207-burning_ignition_coils_pajero_io_see https://www.asia-traffic.com.tw/en/faq/Why-does-the-car-ignition-coil-burn-out/faq_04.html

I would go see the person or shop that put in the new turbo and complain loudly

water in the distributor cap, ht leads , computer harness plugs, around the plugs, coils Use WD-40 and spray liberally over all electrical components and wires.

Check the fluid levels in the gearbox

Poss cam sensor or circuit

have you changed spark plugs?

Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try