20 Most Recent 1989 Lotus Esprit - Page 4 Questions & Answers

How to reset headlight sensor

Need to know/yr./make & model of the vehicle.

Cars & Trucks | Answered on Jan 13, 2021

Which ECU and what age?

Resetting would mean changing or replacing the internal software which under normal circumstances is completely undesirable.

Do you mean removing fault codes and perhaps restoring the default values?

For most modern vehicles utilising obd2 or jobd2, codes of faults affecting the exhaust emissions can be read and erased by compatible generic code readers and dealer level software/equipment is needed for everything else.

Cars & Trucks | Answered on Jan 13, 2021

1 Answer

Traction control light abs and brake light is on

Have it checked for codes .

Cars & Trucks | Answered on Jan 13, 2021

1 Answer

Does anyone perhaps have the wiring diagram for the GWM Steed 2.2 Doublecab?

They tend to be shown in sections on Google. for the full wiring diagram, you would need to purchase a Service Manual.

https://www.google.com/search?q=wiring+diagram+for+the+GWM+Steed+2.2+Doublecab

..

Cars & Trucks | Answered on Jan 13, 2021

1 Answer

If it cant be started without the ignition.....does anyone have an ignition gas cap combo with keys that i can purchase without forking out 200 bucks for it?

Spend the money and don't lose them again.

Cars & Trucks | Answered on Jan 13, 2021

2 Answers

I am trying to connect to Westjet for on-line check-in and it won't let me?

try this link might give you more ways of doing it... https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Westjet+for+on-line+check-in ..

Cars & Trucks | Answered on Jan 13, 2021

2 Answers

I just bought a 1997 bobcat 753 skid steer. It runs great for about 20 mins then motor bogs down then completely shuts down. Its like i turned it off. After about 10 mins it will restart run for another 15 mins then does the same thing. Does anyone know what my problem may be?

I recently tried
the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose the problem.
I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything
got it from www.reliable-store.com

Cars & Trucks | Answered on Jan 13, 2021

3 Answers

What is the meaning edc 03792-10 code. How can rectify. Man Tgx

I have a MAN TRUCK TGX 33.540 there is MALFUNCTION
GEARBOX on the screen

Cars & Trucks | Answered on Jan 12, 2021

1 Answer

Automatic Repair Not Working

You should restore / reset your computer using Media Creation Tool. You will have to cut Media creation tool on another computer if you can't do this on your existing computer.

If that doesn't work - I would recommend that you should consider a clean install of your existing Windows.

Or you can use one of those fleshed-out solutions mentioned in this article:
[FULL] Solutions To Fix Windows Automatic Repair Not Working Issue

Cars & Trucks | Answered on Jan 12, 2021

1 Answer

My corsalite is over fueling

There can be a lot of reasons for over fuelling. Reasons like a clogged filter, a faulty sensor or a faulty fuel injector.
I would suggest you get the vehicle plugged into a diagnostic system or an obd2 scanner. There are plenty of cheap, (Very Basic), OBD2 scanners available to buy online. This could give you some error codes that are clues to the reasons for the over fuelling.

Cars & Trucks | Answered on Jan 12, 2021

2 Answers

Seat leon 2003 problem with speedo not working and

no but they do suffer with the float sticking in the sender unit and check the sender unit on top of the diff unit for the speedo

Cars & Trucks | Answered on Jan 12, 2021

1 Answer

1990 Delta 88 Royale Brougham. What would cause the the heater to turn on after the car has been started for more then 5 mins ?

Faulty shut of valve. Engine and water starts cold, after 5 minutes it is warming up. The heat 'off' control isn't working. It is a mechanical faucet, the heat is on all the time.

Cars & Trucks | Answered on Jan 12, 2021

1 Answer

Radio buttons in

Yes they do. Press them again and they will come out.

Cars & Trucks | Answered on Jan 12, 2021

1 Answer

Hie every I'm having a hard time finding the flywheel timing marks for a GWM steed 3 2.8 I remove the flywheel to skim by now it does not start Can anyone assist with the information Please

This is a very obscure South African vehicle not available in North America where we are. This might help though?

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk015PG-gUWucEH19DEoKaRC-aeCq7g%3A1610420010643&ei=Kg_9X-q0JqKx5NoP7L-riAk&q=GWM+steed+3+2.8+timing+marks

and manuals ( it is Chinese! )

https://www.carpdfmanual.com/great-wall/

..
..

Cars & Trucks | Answered on Jan 12, 2021

1 Answer

My blower just stop working on my 9-3 1998

Make of vehicle?

Cars & Trucks | Answered on Jan 11, 2021

1 Answer

Komatsu FAI 898-894 Manual

Buenas tardes necesitar?a el manual de una fai/komatsu 264d o 898

Cars & Trucks | Answered on Jan 11, 2021

2 Answers

Why wont my car get warm when i turn the heater on it has never done that. I had put to water in it a couple of times and it heated right up. Ihave had a couple of times where the water has come out.

see a local mechanic

Cars & Trucks | Answered on Jan 11, 2021

1 Answer

Hello My xtreme 3.5 h.p won't start but I don't know what position the yellow lever ,which turns on the fuel, should be IN OR OUT? Can you help please? Kind regards Howard England

Mostly the push-pull fuel tap is pulled out for on and the lever type is turned so the lever points along the fuel outlet for on, though there are usually exceptions to general rules.

Cars & Trucks | Answered on Jan 11, 2021

4 Answers