20 Most Recent 2006 Hyundai Tucson 2.7 Questions & Answers

check radiator fan motor first, if good check fan belts. then check thermostat. also check radiator for blockage.

2006 Hyundai... | Answered on Oct 13, 2016

Electronic Stability Control. It is your traction control for slippery surfaces. Your anti-lock brakes are involved with this.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_3e83613ef5f2a68b

2006 Hyundai... | Answered on Feb 26, 2015

If the oil-change light does not go away after service, carry out these steps to reset it:
1. Put the ignition in "ON" position
2. Use the menu on your speedometer
3. Push the button on your steering and get to the 'Service Required' menu
4. Hold the "OK" button to reset. The light should go away now.

Hyundai Tucson... | Answered on Mar 30, 2020

Nevr go tua dealr..a partstore can probly help u or call ab independent garage..cud assist u for free

Hyundai Tucson... | Answered on Jan 10, 2019

Presumably auto transmission?

With auto transmission there is little relationship between the dry capacity and the fluid change capacity because a great deal is held in the passages, pump, valve block, etc.

Hyundai Tucson... | Answered on Aug 24, 2018

their at each wheel the small black wire runs by the brake line behind the rotor -need to take wheel off

Hyundai Tucson... | Answered on Aug 21, 2018

Under the valve covers.

Hyundai Tucson... | Answered on May 24, 2018

You can try using some BB blast unlocking mechanism and the key mechanism but it sounds to me like solenoid is going bad but who knows try to be be blessed without it I can never tore down that 40 Ford the stuff is wonderful

Hyundai Tucson... | Answered on May 14, 2018

without seeing vehicle i cannot post a answer ,i can only suggest the clockspring under steering wheel or the wires under the seat ? .if software will not read fault or you dont have hte right software then you can connect a 3 ohm resistor in the power lead to whatever unit and see if light goes out then you know what is causing fault .airbag wiring is yellow

Hyundai Tucson... | Answered on Apr 08, 2018

Not finding what you are looking for?
2006 Hyundai Tucson 2.7 Logo

Popular Tags

12 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tucson Hyundai

  • Tucson Hyundai

Most Popular Question

overheating hyundai tucson engine

  • Cars & Trucks