2006 Honda Accord 3.0 - Answered Questions & Fixed issues


Here are the possibilities.
Possible causes- Speed sensor harness or connectors
- Sensor circuit is open or shorted
- Speed sensor

2006 Honda... | Answered on Jun 14, 2012 | 1,291 views


If a b14 code pops up on your Accord, you can fix it as follows:
1. Replace engine oil and filter
2. Check the tire pressure and rotate the tires
3. Check drive belt, install a new air cleaner element, and replace the dust and pollen filter
4. Replace the transmission fluid if required
5. Replace timing belt and spark plug if need be
6. Change the engine coolant
7. Also, replace the back differential fluid
Note: if the problem gets resolved at step 1, you don't need to move forward with the rest of the steps.

Honda Accord... | Answered on Apr 29, 2020 | 2,204 views


- Faulty Cylinder Position Sensor
- Cylinder Position Sensor harness is open or shorted
- Cylinder Position Sensor circuit poor electrical connection

try and replace the cylinder position sensor

Read more: http://helpforcars.net/obd_codes/p1381_honda.html#ixzz3ERL6WDd3

Honda Accord... | Answered on Nov 15, 2019 | 1,691 views


If it sputters while pressing the gas hard, I would check spark plugs.

Honda Accord... | Answered on Sep 11, 2019 | 55 views


Get a good code reader and check for trouble codes. This is usually a faulty, loose or disconnected sensor on one of the wheels.

Honda Accord... | Answered on Aug 29, 2019 | 60 views


1700 is a generic code for many makes and models referring to a transmission issue.1751 is directed to the shift solenoid valve b. May be able to replace just that solenoid and be ok. Cheaper than a transmission.

Honda Accord... | Answered on Apr 24, 2019 | 124 views


Remove to see if fuse is not blown ,if ok check radio is connected to car.

Honda Accord... | Answered on Feb 13, 2019 | 53 views


I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 yearsmust try this bitman and reliable-store. Both are good

Honda Accord... | Answered on Feb 06, 2019 | 63 views


If the laser head hit the label on the disk, it may be scratched or knocked out of position. You may be able to remove it and check for physical damage but it would probably be better to send the player in for service..

Honda Accord... | Answered on Feb 01, 2019 | 56 views


Is the replacement radio identical to the original? If it is, then were you able to confirm the replacement radio was working?

Honda Accord... | Answered on Jan 06, 2019 | 109 views


You disconnected the battery. You didn't have the key in the ignition when you connected the new battery!
Resetting a Vehicle Anti-Theft System
This is how you reset an anti theft system if you have the anti-theft light on, or your car is cranking, but you have no spark.

Doing a full reset of the anti-theft system.

Disconnect both battery leads for at least two hours.
Hold the negative and positive leads together for 5 minutes to fully discharge any power.
Put the key in the ignition, but not turned on. VERY IMPORTANT!
Connect the positive lead.
Connect the negative lead in one swift movement.
Wait 15 minutes for the system to fully reset.
Posted by Andrew... on Jan 14, 2018

Honda Accord... | Answered on Dec 29, 2018 | 85 views

Not finding what you are looking for?
2006 Honda Accord 3.0 Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,991 Questions

1991 Honda Accord
1991 Honda Accord

2,683 Questions

1995 Honda Accord
1995 Honda Accord

1,633 Questions

1996 Honda Accord
1996 Honda Accord

1,633 Questions

1998 Honda Accord
1998 Honda Accord

1,569 Questions

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...