Top 20 2006 Honda Accord 3.0 - Page 8 Questions & Answers

You might not have lined up the timing marks properly or may have left out a plug or ground. Recheck your timing marks.

THE RADIATOR IS BOLTED TO THE CORE SUPPORT DOWN BOTH SIDES. ON AUTOMATIC MODELS YOU HAVE TWO CONNECTIONS FOR TRANS OIL COOLER. AND FINALLY THERE ARE TWO LARGE HOSES TO BE REMOVED. DRAIN THE COOLANT FIRST.

Call your honda dealer they will give you the 1-800 number to call to get the code for your radio. They will ask for the vin# and who the car is registered too.

Re-check the timing, the ticking might be a timing problem. Hope this helps.

hope this help

Are your keys locked inside? If you don't have keys, I can only suggest you call road assistance or someone who has a second set of keys.

There will be a fuse for that under the dash near the Lighter or near the firewall under the hood. Hope this is what you needed.

Wow, Did you come back from the future? I'm guessing you mean a 2008 Accord. Remove the Brake/Signal Lens assembly, Twist and remove the socket then Pull out old bulb, push in new one.

You will need to be more specific with your question to get help. Front brakes?, back brakes? if back disc or drum? Entire braking system? ABS not working? There are some very knowledgeable people here. But we will need a more in depth description of your problem to help you.

The sat nav is having trouble reading the disk, Is it an original disk? Clean the disk and the head unit! Check the disk is not scratched!

http://grassrootsmotorsports.com/forum/grm/is-there-a-cheap-easy-fix-for-a-hole-in-exhaust-ma/15061/page1/

you will need a lot of money, time, spares, mechanical tools and training to convert this over Better to trade in and get a manual model

bank 1 is the side that has the # 1 cylinder , sensor 1 is the FIRST sensor down stream from motor before catalytic converter the one after catalytic converter is bank 1 sensor 2

- Faulty Cylinder Position Sensor - Cylinder Position Sensor harness is open or shorted - Cylinder Position Sensor circuit poor electrical connection try and replace the cylinder position sensor Read more: http://helpforcars.net/obd_codes/p1381_honda.html#ixzz3ERL6WDd3

secondary restrant system an air bag

Here's alink to your code. P0443 Evaporative Emission Control System Purge Control Valve Circuit

Try www.cartalk.com or www.kbb.com I like them both, for cars. Hope this helps.

1-3-4-2

Hi John, 66-01 Brake Pressure Sensor Malfunction.

Main bearing stage 1: 25NM, stage 2: 50NM Big-end bearing stage 1: 14NM, stage 2: 28NM Cylinder head stage 1: 30NM, stage 2: 60NM