Top 20 2006 Honda Accord 3.0 Questions & Answers


Here are the possibilities.
Possible causes- Speed sensor harness or connectors
- Sensor circuit is open or shorted
- Speed sensor

2006 Honda... | 1,291 views | 0 helpful votes


If it sputters while pressing the gas hard, I would check spark plugs.

Honda Accord... | 55 views | 2 helpful votes


Get a good code reader and check for trouble codes. This is usually a faulty, loose or disconnected sensor on one of the wheels.

Honda Accord... | 60 views | 0 helpful votes


1700 is a generic code for many makes and models referring to a transmission issue.1751 is directed to the shift solenoid valve b. May be able to replace just that solenoid and be ok. Cheaper than a transmission.

Honda Accord... | 124 views | 1 helpful votes


Remove to see if fuse is not blown ,if ok check radio is connected to car.

Honda Accord... | 53 views | 0 helpful votes


I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 yearsmust try this bitman and reliable-store. Both are good

Honda Accord... | 63 views | 0 helpful votes


If the laser head hit the label on the disk, it may be scratched or knocked out of position. You may be able to remove it and check for physical damage but it would probably be better to send the player in for service..

Honda Accord... | 56 views | 0 helpful votes


Is the replacement radio identical to the original? If it is, then were you able to confirm the replacement radio was working?

Honda Accord... | 109 views | 0 helpful votes


You disconnected the battery. You didn't have the key in the ignition when you connected the new battery!
Resetting a Vehicle Anti-Theft System
This is how you reset an anti theft system if you have the anti-theft light on, or your car is cranking, but you have no spark.

Doing a full reset of the anti-theft system.

Disconnect both battery leads for at least two hours.
Hold the negative and positive leads together for 5 minutes to fully discharge any power.
Put the key in the ignition, but not turned on. VERY IMPORTANT!
Connect the positive lead.
Connect the negative lead in one swift movement.
Wait 15 minutes for the system to fully reset.
Posted by Andrew... on Jan 14, 2018

Honda Accord... | 85 views | 0 helpful votes


this might work for you

Open hood ensure new battery is disconnected.
Open main fuse panel cover under hood and remove horn relay (so you don't have to listen to the horn).
Use the key to lock the drivers door.
Connect the positive battery terminal.
Connect the negative battery terminal (security system will now activate, hazards lights will flash and horn would be going off if the relay was not removed).
Use the key to unlock the drivers door.
Get in, close drivers door.
Use the key to start the engine.
Security system will deactivate.
Get out of vehicle, reinstall horn relay, replace fuse panel cover, close hood.

Honda Accord... | 914 views | 0 helpful votes

Not finding what you are looking for?
2006 Honda Accord 3.0 Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,991 Questions

1991 Honda Accord
1991 Honda Accord

2,683 Questions

1995 Honda Accord
1995 Honda Accord

1,633 Questions

1996 Honda Accord
1996 Honda Accord

1,633 Questions

1998 Honda Accord
1998 Honda Accord

1,569 Questions

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Accord Honda

  • Accord Honda

Most Popular Question

trouble code p0722 output shaft speed

  • Cars & Trucks
Loading...