20 Most Recent 2006 Holden Barina Questions & Answers


The best solution you'll get from books at www.reliable-store.com These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wirin g diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

2006 Holden... • Answered on Jun 21, 2018


battery and dirty terminals is a good assumption have the battery load tested

2006 Holden... • Answered on Dec 22, 2017


your holden is a daewoo get rid of it

2006 Holden... • Answered on Aug 11, 2017


The only scenario that i can think of that could create all of your issues is your clutch is and has been slipping for some time. All other train of thoughts really don't make sence. This would give issue either selecting a gear whilst driving or possible slecting gear and engine speed raising but vehicle not moving from a stand still start on sharp pull away. Engine speed would be running higher than required most of the time which would increase engine temp considerably. Due to extreem engine temp your air con would probably switch off as to not put additional load on your engine creating even higher tempratures. My advise is It really needs a visual / test drive to confirm a diagnosis by a qualified person for this information to be confirmed. I hope this makes sence good luck.

2006 Holden... • Answered on Jan 12, 2017


the cdi unit needs replacement,you will find it inside the door near the lock itself

2006 Holden... • Answered on Dec 22, 2016


It could be the crank sensor. If it's no good it'll overheat and the engine will stall. In saying that you'll need to have it looked at as it could be a number of things

2006 Holden... • Answered on Oct 12, 2016


Yes it is water cooled or heated depending on the time of year.

2006 Holden... • Answered on Jun 02, 2016


Try opening the door from the outside (or get someone else to do it for you) whilst sat in the car to see if it still does it. Then lift yourself off the seat and see if it stops. If it does stop whilst you are not sat down it may be a problem linked to the seat occupancy switch that activates when you sit down.

2006 Holden... • Answered on Oct 08, 2015


Check fuses for Steering control module and connections to back of Display, same thing happens on Volvos usually fuse or heatsink on display control IC gets hot due to heat paste drying out clean and replace if possible or seek service agent , An OBD reader may possibly show up fault so you need to get a scan of the DT faults your local garage will do this quite cheap for you.

2006 Holden... • Answered on Jun 18, 2015


http://www.polmex.com.au/pdf/barina%20button%20replacement%20instructionby%20polmex.pdf

2006 Holden... • Answered on Apr 29, 2015


about 7 ft lbs or tighten lightly then 1/4 turn

2006 Holden... • Answered on Apr 03, 2015


buy a mechanics stethoscope at the auto supply.it is well worth the money. Have a listen to the pulleys. do not touch moving parts! just the stationary bolts. listen to the alternator as well. an alternator can make alot of noise if the bearings are gone.

2006 Holden... • Answered on Mar 15, 2015


Look for a sump plug in the bottom of the engine. If you only want to take a small amount of oil out do it cold engine, so as to not burn yourself with hot oil.

2006 Holden... • Answered on Mar 05, 2015

Not finding what you are looking for?
2006 Holden Barina Logo

132 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Holden Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

14869 Answers

Richard Maldonado
Richard Maldonado

Level 2 Expert

61 Answers

Raj Patel

Level 3 Expert

1042 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Barina Holden

  • Barina Holden

Most Popular Question

instrument panel frozen could possible

  • Cars & Trucks
Loading...