2006 GMC Envoy Denali - Page 9 - Answered Questions & Fixed issues

On the 2006 model, if you have the steering wheel with the on wheel buttons, keep pressing the i button on the bottom right until you reach Display Units: If it says Metric, press the carriage return button to switch it to English and there is the solution.

GMC Envoy Cars &... | Answered on Jun 18, 2014 | 3,217 views

probably the fuel pump . could also be the coil . no idea the yr what it was doing any problems the day before ???

GMC Envoy Cars &... | Answered on May 27, 2014 | 16 views

There are two O2 sensors, one on the exhaust manifold on the right side (passenger side) of the engine, and one just after the catalytic converter.

GMC Envoy Cars &... | Answered on Jul 24, 2019 | 1,050 views

Problem could be a bad oil pressure sensor or the oil pump is failing. A mechanical oil pressure gauge needs to be hooked up to verify actual oil pressure. Problem could also be a bad stepper motor in the instrument cluster that drives the gauge.

GMC Envoy Cars &... | Answered on Apr 20, 2014 | 221 views

Check fuel filter, air filter, sparkplug wires.

GMC Envoy Cars &... | Answered on Apr 16, 2014 | 23 views

it sound like the oil pressure sending unit is bad Had a 91 chevy do the same thing

GMC Envoy Cars &... | Answered on Apr 05, 2014 | 237 views

If mileage is over 100K and plugs have not been changed, it is time. Could also be a bad coil pack or vacuum leak at intake manifold.

GMC Envoy Cars &... | Answered on Apr 03, 2014 | 124 views

It take quite a bit of effort to release the shaft. Try harder.

GMC Envoy Cars &... | Answered on Apr 03, 2014 | 90 views

It is definitely an air leak, could be the hoses or the bags. Needs to be troubleshot.

GMC Envoy Cars &... | Answered on Apr 03, 2014 | 34 views

Can you see the smoke colored sensor near the windshield? I've had one break and fall down which caused this exact problem. If you can see it, pull the plastic trim piece off, make sure the connections are actually connected, have seen these come unhooked.

GMC Envoy Cars &... | Answered on Mar 24, 2014 | 197 views

changing starter on a gmc s15 pick up truck

GMC Envoy Cars &... | Answered on Mar 22, 2014 | 25 views

if crankshaft is damaged, engine will need to come out.. front diff assembly must be detached from the oil pan, and pan must be removed from engine to remove diff from chassis.
it will give you access to main brgs to inspect for damage.

GMC Envoy Cars &... | Answered on Mar 16, 2014 | 40 views

check the top runner on the tailgate on the outside to see if damaged. if not that then check the molds around the gate

GMC Envoy Cars &... | Answered on Mar 04, 2014 | 205 views

there are several problems --- one is to check that there is power to the solenoid or relay to engage the starter . Check for good earth wire where it is on the engine /body. If you have power at the solenoid/relay on the wire from the ignition in the run position then it most likely will be a bad solenoid / relay

GMC Envoy Cars &... | Answered on Mar 01, 2014 | 94 views

That stinks... Those engine are more involved. The coolant can leak from three different areas. The head gasket, the cylinder sleeves, and the front timing cover. If you drain the oil pan, drop down the rack and pinion unit and remove the oil pan. You can try pressure testing the coolant and see where the coolant is dripping from. Food for thought. These engines are known for valve issues in the head after 250K miles. The repair alone can be $3K or more. If I can be of anymore help , let me know.

GMC Envoy Cars &... | Answered on Feb 28, 2014 | 64 views

Do you hear the pump come on briefly with key in run, not start? You should check fuel pressure-some parts stores rent a fuel pressure tester for small fee. Or try this: spray some starting fluid into the air intake when trying to start. If it starts and runs a few seconds, you know you have a fueling problem- pump or injectors or something with the fuel.
Always check for trouble codes with a no start. If checking for spark and have no spark to the plugs, then it could be the crank position sensor. That sensor is crucial for the computer to figure spark timing. But if no spark, it could be other things as well, like the cam position sensor, ignition control module, or a problem in the circuits for all these. The crank sensor is just an educated guess for no spark-not a certainty.
Since it won't run, you can't go to have the computer scanned for free at a parts store-do you have any friends or relatives with an OBD-2 hand held scanner? Just to check for any trouble codes, but do check for fuel and spark.

GMC Envoy Cars &... | Answered on Feb 16, 2014 | 144 views

It sounds like it might be as cheap as replacing a fuse or fuses. Have you checked your fuses to see if any of them are blown? Refer to your owner's manual for fuse box location. Fuses can easily be checked with a test light or voltmeter/ohmmeter.

GMC Envoy Cars &... | Answered on Feb 13, 2014 | 56 views

You have the inline 6 engine? You actually have 6 coils. Remove the plastic resonator on top of the engine, remove the ducting to give you more room. When it's off, you now can see all 6 coils. Remove the electrical connector then remove the screw that holds the coil in place. After that, just pull the coil out.

GMC Envoy Cars &... | Answered on Feb 03, 2014 | 227 views

Have your motor mounts and transmission mounts checked. Common problem. Or are you talking about the bump you feel while coming to a stop? Another common problem, grease the slip yoke on the driveline to fix this particular problem.

GMC Envoy Cars &... | Answered on Feb 03, 2014 | 44 views

Not finding what you are looking for?
2006 GMC Envoy Denali Logo

Popular Tags

136 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,220 Questions

2002 GMC Envoy
2002 GMC Envoy

1,415 Questions

2003 GMC Envoy
2003 GMC Envoy

1,362 Questions

2006 GMC Envoy
2006 GMC Envoy

592 Questions

2005 GMC Envoy
2005 GMC Envoy

537 Questions

Top GMC Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides