20 Most Recent
2008 GMC Envoy Denali - Page 7 Questions & Answers
Gmc keyless entry
I would start by replacing the battery in the key fob remote that goes on your keychain. You can take it to most auto part stores and they will test/replace the battery in the device. It's a fairly cheap fix. If the device still isn't working after a new battery, then you will need to replace the fob. Some auto part stores like, AutoZone, will carry some of them but some you need to go to your local GMC dealer.
Vibtrations
The gas pedal could beva drive by wire, meaning there is no physical connection between it and the engine. You did not say the year of your Envoy. If it is there may be a bad accelerator position sensor. If is not drive by wire you may have an issue with your engine. Either way have it checked by a technician that knows you make of vehicle.
What will happen if the transmission is overfilled with oil?
Transmissions that are overfull can "whip" the fluid, buy catching the fluid on the rotating parts. This is bad for a number of reasons,, It causes air to be trapped in the fluid (foam) causing a loss of the ability to transmit pressure to the apply devices, they hold the clutch packs and bands, and move pressure control valves, causing a slipping condition. this in turn causes damage to componets and a great deal of heat, also very bad for the transmission.
How do i remove rhe
Hello, to remove the thermostat from the housing , follow this steps:
- Remove the necessary coolant from the radiator.
- Remove the alternator, Loosen the outlet hose
clamp at the thermostat housing. Remove the outlet hose from the
thermostat housing.
- Remove the thermostat housing bolts.
- Remove the thermostat housing from the engine block.
- Clean all of the surfaces of the thermostat housing.
- Clean the sealing surface of the engine block.
Thanks
To set the temperature in Fahrenheit or Celsius
On the 2006 model, if you have the steering wheel with the on wheel buttons, keep pressing the i button on the bottom right until you reach Display Units: If it says Metric, press the carriage return button to switch it to English and there is the solution.
Not finding what you are looking for?