20 Most Recent 1998 Ford Laser Questions & Answers

0helpful
1answer

1997 Ford Laser. Can I put central locking in my car?

Anything is possible at a cost. Details in the link. https://www.google.com/search?q=1997+ford+laser+install+central+locking+system ..
6/23/2022 4:19:08 PM • 1998 Ford Laser • Answered on Jun 23, 2022
0helpful
1answer

My 1998 ford laser stering wheal shakes when in drive but not in neutral

in drive but not moving --- check for failed engine mounts if moving have a wheel alignment done
7/31/2016 7:23:10 AM • 1998 Ford Laser • Answered on Jul 31, 2016
0helpful
1answer

My 98 laser misfires at idle in drive and under load,how do I fix this

try new spark plugs
3/13/2015 10:26:51 PM • 1998 Ford Laser • Answered on Mar 13, 2015
0helpful
1answer

I NEED A WIRING DIAGRAM OF THE CHOKE FOR A 1997 FORD LASER TRACER 1300

If this is electronic fuel injection it does not have a choke, but instead uses a coolant temp sensor (common part to fail).
1/29/2015 6:51:09 PM • 1998 Ford Laser • Answered on Jan 29, 2015
0helpful
1answer
0helpful
1answer

What is the settings for a ford laser 1.6 1998 model big end bearings

Settings? Your question is not clear. Do you mean torque setting? Or bearing clearance? Be specific. Think about what it is you want to know. And by the way, an Internet forum is NOT the place to get this kind of information. You need to know with absolute certainty what the values are and not depend upon what someone anywhere in the world might tell you over the internet. The Internet is great for many things; this is not one of them. Find a repair book for your vehicle and get your information from a published source. If you are doing this kind of work, you cannot afford to screw it up by not investing in the required manuals. It will pay off in the long run.
11/10/2014 2:25:25 PM • 1998 Ford Laser • Answered on Nov 10, 2014
0helpful
1answer

My ford 2000 automatic car has trouble changing gears, revs stay the same, also the overdrive button light goes on when pressed, but it does not respond, ie the revs stay the same. Was serviced 3 week

Do you have a check engine light or a flashing O/D light? If so, then you have a stored trouble code which will point to the issue. The only type of scanner capable of reading these type of codes is one which says that it could read manufacturer specific codes. Some auto parts stores have these scanners, and will read the code for your for free. If their scanner won't retrieve the code then you will have to go to a transmission shop. Check WWW.ATRA.Com for a shop in your area.
10/22/2014 1:02:53 PM • 1998 Ford Laser • Answered on Oct 22, 2014
0helpful
1answer

Ford laser kj 1600 1997

This is way too general a question. For instance, did the fuel consumption change? Or was it always like that? Almost anything imaginable can affect fuel economy. Do some more digging, or take it to a professional who can run diagnostics on the engine. Sometimes that is the only way some things can be found. You also did not offer any mention of the manner in which the car is driven. You also did not mention HOW the car drives, irrespective of fuel economy. You have asked a question that is impossible to answer.
9/9/2014 2:12:11 PM • 1998 Ford Laser • Answered on Sep 09, 2014
0helpful
1answer

What is the correct tyre pressure for a 205/50/16

depending on the vehicle /weight and expected speed, 26-28 psi. heavy vehicle or travelling at high speed it can go up to 30psi. The recommended tyre pressure will be on the specification plate for wheels and tyres on the door edge or door opening pillar. Some makes of tyres have the tyre pressure moulded into the side wall of the tyre.
8/30/2014 6:20:46 AM • 1998 Ford Laser • Answered on Aug 30, 2014
0helpful
1answer

Air intake sensor problems

If it flairs & comes out of gear, it is a failed transmission No fix for that-has to come out
8/25/2014 5:28:30 PM • 1998 Ford Laser • Answered on Aug 25, 2014
0helpful
1answer

How to bypass immobiliser kl laser

We can't give that type of info. We don't know who we're giving it to or how they'll use it.
7/29/2014 5:33:09 AM • 1998 Ford Laser • Answered on Jul 29, 2014
0helpful
1answer

Ford laser 99 no power

Hi there. well when you throttle up to about 2000rpm do you get blue smoke coming out the exhaust.When driving on flat road will it power up as normal with out missing or getting hot. what colour was the old spark plugs were they black or light brown. When you start engine and run for 3 minutes then let it idle and remove oil filler cap do you get smoke coming out. Number 1 if yes then engine is lacking power due to piston rings worn answer rebuild engine. Number2 spark plugs brown [good] if black soot as num1. Number 3 if you get black smoke or blue ,then the engine is lacking compression could be your problem as num1 OTHER WISE GET YOUR TIMING CHECKED AND SET TO BOOK.
5/23/2014 9:23:18 AM • 1998 Ford Laser • Answered on May 23, 2014
0helpful
1answer

Why does the clutch work only when i pump the pedal

bleed the clutch system !
4/29/2014 10:51:11 AM • 1998 Ford Laser • Answered on Apr 29, 2014
Not finding what you are looking for?
1998 Ford Laser Logo

77 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Laser Ford

  • Laser Ford

Most Popular Question

ford laser kj 1600 1997

  • Cars & Trucks
Loading...