20 Most Recent 2002 Ford Focus Questions & Answers

This info should be in your owners manual. If you don't have an owners manual, there are a couple of web sites where you can look at the owners manual for free, fleet.ford.com, also, fordparts.com
At fordparts.com, you have to click on the pro center link, then technical resources.

If you rather I post the info, that's ok? http://www.fleet.ford.com/http://www.fordparts.com/

2002 Ford Focus | Answered on Sep 20, 2018

good afternoon, I want to change the ford focus band 2001 zertec2.0 has a / c and I want to eliminate it,
the bamda should be ordered is for car without a / c or would take another measure
Thank you

2002 Ford Focus | Answered on May 26, 2018

Right above the check engine light ?
Powertrain warning lamp ,is what factory service info calls it .
Powertrain Malfunction Indicator Lamp The powertrain malfunction indicator lamp illuminates when a DTC is registered in the PCM which does not affect exhaust emissions. This lamp will also illuminate if the fail-safe cooling strategy is invoked by the PCM.
Have vehicle checked for DTC'S - diagnostic trouble codes .

2002 Ford Focus | Answered on Feb 20, 2018

Sounds like a faulty relay that fails when it gets hot.

2002 Ford Focus | Answered on Jan 14, 2018

was the oil clean of residue ?
you might have a faulty valve that makes the shifts rough

2002 Ford Focus | Answered on Jan 03, 2018

As the problem is intermittent, the pcm may clear the codes when it sees fit. These codes are unrelated in terms of the circuits involved, but they could be related through a connector or an issue with the junction box in the engine compartment. Look around under the engine for any wires that are loose that may be touching a hot manifold or exhaust pipe. Repair any damaged wires. If there was no damage, suspect some damage near the junction box. Was the car in an accident? Has someone been in the box recently?

2002 Ford Focus | Answered on Jul 10, 2017

remove and clean the idle sensor valve. pull out and clean the PCV valve (on top of the valve cover).blow out (from the inside) the air filter. do not apply gas until after your vehicle starts.

2002 Ford Focus | Answered on Apr 07, 2017

Why would an DOHC engine have push rods? The camshafts' lobes do the pushing of the valve stems. don-ohio

2002 Ford Focus | Answered on Feb 08, 2017

Which band are you looking to adjust ?

2002 Ford Focus | Answered on Dec 23, 2016

the wand has failed ,this is whats its called in the trade ,now jack up the front of the vehicle then with the belly plate removed you undo the supporting crossmember for the radiator ,this will allow the rad to drop a bit .Now with a 10mm ring spanner put your arm up and undoo the 10mm bolts on the back of the bonnet lock mechanism .simple? well it is the biggest headache is getting the right part so remove it all first then take to dealers for the right one as lots of changes on this part .I thing you will find that a small plastic connection on the end has failed it like a cross in it .But you have to but the complete unit .

2002 Ford Focus | Answered on Nov 13, 2016

Check plugs and plug wires or coils. Also do you have a check engine light on?

2002 Ford Focus | Answered on Oct 26, 2016

Not finding what you are looking for?
2002 Ford Focus Logo

387 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,703 Questions

2001 Ford Focus
2001 Ford Focus

2,580 Questions

2003 Ford Focus
2003 Ford Focus

2,002 Questions

2005 Ford Focus
2005 Ford Focus

1,196 Questions

2004 Ford Focus
2004 Ford Focus

872 Questions

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Focus Ford

  • Focus Ford

Most Popular Question

open bonnet key ford focus 2002

  • Cars & Trucks