20 Most Recent
2009 Dodge Durango SLT Questions & Answers
Will not start, shifter indicator no light up
Try to start in neutral. If it starts, replace the neutral safety switch. Under the vehicle, on the drivers side, mounted to the transmission, under the shifter cable. It needs replaced anyway because the same switch gives the signal for the shift indicator.
I need a wiring diagram
- 2005 Dodge Durango Car Radio Stereo Audio Wiring Diagram
- Car Radio Constant 12v+ Wire: Gray/Red
- Car Radio Switched 12v+ Wire: The radio harness does not provide a switched power source. Run a wire to the fusebox for switched power.
- Car Radio Ground Wire: Black
- Car Radio Illumination Wire: Black/Yellow
- Car Stereo Dimmer Wire: Orange
- Car Stereo Antenna Trigger: N/A
- Car Stereo Amp Trigger Wire: N/A
- Car Stereo Amplifier Location: N/A
- Car Audio Front Speakers Size: N/A
- Car Audio Front Speakers Location: N/A
- Left Front Speaker Positive Wire (+): Dark Green
- Left Front Speaker Negative Wire (-): Brown/Red
- Right Front Speaker Positive Wire (+): Brown/Yellow
- Right Front Speaker Negative Wire (-): Brown/Light Blue
- Car Audio Rear Speakers Size: N/A
- Car Audio Rear Speakers Location: N/A
- Left Rear Speaker Positive Wire (+): White
- Left Rear Speaker Negative Wire (-): Dark Blue/Red
- Right Rear Speaker Positive Wire (+): Brown/White
- Right Rear Speaker Negative Wire (-): Brown/Orange
regards,
Tony
How do you fix a
P0562 is a system voltage low. Most likely the alternator has failed.
Location of valet/override button on dodge durango 19999
The valet/override button is located right under the steering column on your 1999 Dodge Durango. To reset the alarm, press and hold the button within five seconds of cranking up the engine - release it when the security lights stop blinking.
How to replace rear sway bar links and bushing on Dodge Durango 07
Joleen,
Replacing the sway bar bushings and links is not that difficult. They can be ordered from any auto-parts store, Amazon or eBay. However, you will need to know your rear sway bar diameter before ordering parts. The only way to know this is to measure the rear sway bar diameter. If you're real lucky, the rear bar may have an existing part number tag, but I wouldn't count on it.
Replacement procedure can be found on youtube or similar with a Google search.
Best regards,
Rod torque specs for a 5.7l hemi
The rod torque specs are 15ft/lbs plus 90deg turn. To know more about the overall torque sequence, please follow the steps mentioned in this video https://www.youtube.com/watch?v=Xv0Y1t2LDGI
Not finding what you are looking for?