Top 20 1993 Daihatsu Rocky - Page 8 Questions & Answers

Most Immobiliser systems are designed where you cannot bypass it. If it was so easy more cars would get stolen. A good Auto Electrician might be able to help you find out why it won't switch off.

Type in daihatsu dealers on google and find one nearest you

Have you tried to press down the boot door when you press the the remote central locking fob? I have no exprience Daihatso Sirion 2008, but there sholude be a bootlever at the drivers door.

Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try

1-3-4-2

Possible broken engine/tranny mounts

24mm

Remove all joints and lube with grease
Long process
If excessive corrosion or rust
Replace bad parts

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything someone on fixya recommended it to me and I thank him even today They have full manuals and it's verrrrry cheap and mine I got free in offers 3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins there is one website more but i don't remember its name it was 2 years back bitman something link this Try these out brother

Check condition of distributor cap and/or hall sensor in distributor cap. or condition of fuel filter suction pulls crud into filter and settles when no suction

1-3-4-2

Just push on the door

Not to worry friend, when my car go sick i avoided going to mechanic looking for DIY_Repair when I found this website https://big-manuals.com/ and this book helped me repair it within an hour, all by myse lf!!!! It's amazing, no hassle at all !!!!!!

First locate the thermostat housing. Do this by following the large top radiator hose back towards the engine. It should attach to a housing shaped like the one in the attached image. Next drain the coolant out of the system. The housing is held down with 2 bolts. Remove these bolt and lift off the housing. The thermostat should lift out. When fitting the new thermostat use a new gasket. The bolts should Not be too tight! Fit the bolts finger tight then tighten until the bolt grips firmly. Then Stop! (7ft lbs/10Nm). Refill the coolant system. Start the engine and let it warm up to working temperature. **Carefully** feel the top radiator hose if the thermostat is working that hose should start cold then gradually get warmer. Stop the engine and let it cool down. Once cold, check the coolant level and the thermostat housing for leaks.

Duel cam or single. I do believe it’s a none interferiance.

Yes.

I suggest you get one of those manuals from www.reliable-store.com they can help yo u in this

That one is not working

I don't have a 2007 listed but up to 2002 are all interference engines which suggests that valve damage will occur in the event of a belt failure

just go to the given link get the service and repair manual get the replacement diagram and solve the problem by your own http://toolsnyou.com/