20 Most Recent
2006 Chrysler 300 Touring - Page 9 Questions & Answers
How do you hard reset the uconnect?
My Uconnect is factory installed on my 2005 Dodge Truck. There are two control buttons on the rearview mirror for the uconnect. For a long time my uconnect would not fully function with my bluetooth phone and then lately it quite working most of the time. I did a bunch of research adn found this procedure to do a hard reset. After doing this the uconnect came back fully and all functions are working. I now this sounds stupid and you feel stupid doing it, but it did work for my vehicle.1- Turn on ignition w/doors closed2- Press both buttons on mirror for 15-20 seconds3- Shut off ignition4- Open door for 5-10 seconds5- Close door and restart car, Uconnect is now reset
Check Engine light came on I have a chrysler 300. What does that mean?
Your owners manual will explain the check lightThey have been on all vehicles for 32 years,sowe'll continue & let your study that part on the internetYou get any dash light that stays on after the motor is running,you check for codes & have a repair shop use the codes to diagnose & resolve anything needing repair or whateverHow is it possible you never had a check light on any vehicle before?Everyone gets at least one, once a year for the last 2 decadeson all vehiclesThey indicate that the vehicle fails to meet Emission Standardsfor any number of reasons & needs to be repaired as soon as possible
P0404 chrysler 300 - 2005
Trouble Code: P0404
EGR Position Sensor Signal Performance
Possible Causes:EGR Sensor signal circuit is open or shorted to ground.EGR Sensor 5v supply circuit is open or has high resistanceEGR Sensor ground circuit is openEGR solenoid control circuit has a problem.EGR valve actuator loose, sticking, blocked or improperly grounded.EGR Sensor is damaged or has failed.Intermittent condition.PCM has failed.Hi Sherry,here is a link to the EGR valve,easy to remove,just disconnect electrical connector and remove both bolts.
Not finding what you are looking for?