20 Most Recent
Questions & Answers
Location of foglight wiring harness
The Easiest Way is to Get the Wiring Harness Diagram with the Colors and Verify that you plugged the Fog Lights into the Correct Harness. I once had a FORD that had a Fuse BOX that had a FOG LIGHT and No Power to that Fuse. Make sure you test the Fuse at the Box and then Trace the wires and if the Switch was wired at the Factory, you should be all set
2007. How can I bleed the cooling system?
Hello. To 'bleed' your Buick's coolant system, open the 'bleeder valve' then start engine. Let engine 'warm' to operating temperature. Add coolant/water to reservoir tank if needed as system 'bleeds'. As coolant 'bleeds', 'forcefully' out of 'bleeder valve'; close and tighten it AND keep coolant/water level at FULL/HOT. Good luck and keep me informed; if you want to.
Not finding what you are looking for?