20 Most Recent 1996 BMW 535i - Page 3 Questions & Answers

SO DID NOT SCAN THE PCM FIRST SEE RADIO ERRORS OR COMM FAIL TO IT OR??????? MODERN CARS MUST BE SCANNED OR GO BROKE GUE$$ING. CHECK FUSES FIRST (3 FUSE BOXES HERE) NOT TOLD AT ALL CAR DRIVES OK./?????? DO ALL OTHER ELECTRIC THINGS WORK OR NOT. GEE CHECK ALL FUSES, IF NO MANUALS, OR BUY THE SERVICE MANUALS? not told is display on RADIO dead too? and all modes fail AM/FM OR OTHER MODES ALL FAIL. CD FAIL? OR IS ONLY SATELLITE RADIO DEAD.??>??? THE FREE USERS GUIDE SAYS OPEN HATCH INSIDE GLOVE BOX . NOT FOUND YET THIS? AND UNDER HOOD BOX. 2ND BOX IS CARGO AREA , COVER TO SLIDE OFF. WE TEST ALL FUSE, NOT GUESS, LACKING SERVICE MANUAL THERE ARE 100+ LOADS ON 20 FUSES, ONLY SERVICE MANUAL ON ANY CAR COVERS ALL LOADS. ON ANY FUSE. FACTS. SO WE CHECK ALL FUSES, LACKING THE BOOK https://www.bmwsections.com/docs/5series/ GOGGLE HITS. https://fuse-box.info/bmw/bmw-5-series-f10-f11-f07-f18-2011-2017-fuses-and-relay BUT NOW YOU MUST LEARN GERMAN CRAZY NAMES FOR DEVICES, (NOT REAL NAMES JUST SILLY NUMBERS CODES) THAT TAKES A REAL MANUAL TO LEARN OR THIS https://www.youcanic.com/bmw-radio-no-sound-speakers/ GUESS #1 DID NOT LOOK IN ALL 3 FUSE BOXES FOR BLOWN FUSES DO KNOW THAT MOST HEADENDS ARE THEFT SECURE AND SOME JUST KILL DEAD SOUND WHEN THE LICENSE CODES IS LOST EVEN MAIN BATTERY DEAD DOES THAT. ONLY BMW CAN FIX THAT. NOT SCANNING THE PCM/BCM IS JUST NOT WISE. CHECK ALL FUSES THEN SCAN THE CAR, OBD2.

If you are seeing a "no key" symbol on your BMW's dashboard and your window went down, it could indicate a problem with the key or the vehicle's anti-theft system. Here are some steps you can try to resolve the issue:

1. Check the key battery: A low battery in your key fob can cause communication issues with the vehicle, leading to the "no key" symbol. Replace the battery in your key fob and try starting the car again.
2. Try a spare key: If you have a spare key, try using it to start the car. If the spare key works, then the issue is likely with the original key fob, and you may need to have it reprogrammed or replaced.
3. Check for interference: Sometimes, other electronic devices or signals can interfere with the key's communication with the car. Move away from any potential sources of interference, such as cell phones or other electronic devices, and try starting the car again.
4. Check the fuse: If your window is not responding, it may be related to a blown fuse. Check the vehicle's fuse box and replace any blown fuses.
5. Contact a professional: If none of these steps resolve the issue, it may be necessary to contact a professional mechanic or BMW dealership for further diagnosis and repair.

It's important to address this issue promptly as it can leave your car vulnerable to theft (obviously). Hope that helps!!!

traction control (asc) doesn't work anymore. probably a wheel speed sensor.

the labor to remove and install pump is the same for new or used.. I would buy a new pump however it is your money.

I have two ideas on this. Have you disconnected the battery or had it drain flat recently? It may be the anti-theft immobilizer, and needs resetting. Having said that, the second video shows how to reset all the modules and it just starts right up! https://www.google.com/search?q=2004+bmw+318+reset+security+system Or the fuel pump isn't creating enough pressure. You can test with a gauge borrowed from Autozone..

If your 2012 BMW 535i is losing all of its water but not overheating, there could be a few possible causes:

1. Leak in the coolant system: The coolant system of your car may have a leak, which is allowing the water to escape. This could be caused by a faulty radiator, a leaking hose or a cracked engine block.
2. Evaporative loss: In some cases, the water may be evaporating due to high temperatures. This is common when driving in hot weather, and it can be caused by a malfunctioning pressure cap or a faulty radiator cap.
3. Leak in the water pump: The water pump may be leaking, causing the water to escape from the coolant system.
4. Leak in the head gasket: A leak in the head gasket can allow coolant to leak into the engine oil, causing the water to disappear.

You need to have it checked for error codes. You could get tailended if power drops unexpectedly. Without the codes, it could be anything from a bad fuel filter to a failed transmission.

NO VIN TOLD . 2002 bmw 325ci e46? the dealer of this car asks for the VIN or no books or service parts, sold, to you, see whY/.???????? nor manuals my online source has no lighting chapters. users guide does not cover this. service manual at dealer does. buy one?

USA spec car no not? no country of VIN told so answers can be big time wrong, ok? sure get a shop to fix it they have tools you don;'t have. 3.0L is inline 6? called L6 is this car with coil pack that does more than one spark wire? or have 6, COP spark coils, (all I can do is guess) or USA has 6 COPS we check compression first, x6. got cam timing chain NOISE? I guess changed word mean replaced, with new COP coil? well; engine is first , the spark then fuel injector do DTC P0301 was set, and is still set this error, be specific on DTC errors, even tell them. 301 means weak combustion on #1

• bad cylinder compression
• bad spark
• or #1 injector is bad.

why 3 and 5 fails and all are odd cylinders./ is odd but I suspect VVT problems./ no mileage on the engine told. 300k 400k?

run the fault codes to see what put the engine light on engine lights operate for engine faults and transmission faults during the ac repair , a wire could have become disconnected Consider it as a unrelated problem to the AC

Question edited for clarity, add MAKER! Question moved to maker category. BMW Flywheel Bolts = 100Nm or 74 ft-lbs of torque. Sep 3, 2020

How To Replace The Clutch, Flywheel, & Rear Main Seal On ...

https://blog.fcpeuro.com > how-to-replace-the-clutch-flyw...

E90 N46 320i flywheel bolt tension? - BIMMERPOST.com

https://www.e90post.com > forums > showthread Jun 23, 2017 - Note bolts needs to be replaced with new. Bentley manual says originals are stretching bolts, and replacement ones will be self locking type. Torque setting confusion (DMF/clutch/gearbox) - Bimmerpost Jul 30, 2018 Torque specs for flywheel? - BMW 3-Series (E90 E92) Forum Jan 1, 2015 Clutch Job - BMW 3-Series (E90 E92) Forum - Bimmerpost Jul 7, 2018 Torque Specs Thread - BMW 3-Series (E90 E92) Forum Sep 3, 2017 More results from www.e90post.com

Flywheel torque specs? - E46 Fanatics Forum

https://www.e46fanatics.com > ... > E46 > E46 General Jan 30, 2022 - 105Nm per tis. 77.4 lb/ft. Daily driver build thread. Like. Approximate Head bolt torque Oct 16, 2013 DIY: Yet another Torque Guide (YATG) May 20, 2020 HELP - Flywheel Install Torque Spec Jun 26, 2010 Flywheel Torque Specs May 20, 2017 More results from www.e46fanatics.com

Hi, Please use the catalog from the advanced autoparts website or Mcmaster-Carr catalog in order to identify the product and then have access to the particular wire that you're looking for. You might use both resources just to ensure that the color isn't picked at random depending on the source of the part creation. Thank you.

The answer is No to both questions. The security system and immobilizer is there to stop exactly what you are trying to do, start the car without the correct credentials. You can't reprogram computers (ECM and BCM) and the security modules and sensors. You have to fix the issue not find away around it. The immobilizer on that vehicle needs a code. https://www.google.com/search?q=2006+BMW+X5+reset+security ..

Hello. Either your B.M.W. doesn't have a return fuel line or, if it does, that line is blocked/restricted. The latter isn't likely because the engine might 'flood' with gas, making it hard to start/run. Keep me informed; if you want to.

Question edited for clarity. Take it back to the installer at 2:00pm and he can use his pro grade scan tool computer to record what happens. It may be electronic interference from something nearby that starts up during that time. https://www.google.com/search?q=Viper+CE0890+Remote+Starter+randomly+starts+up ..

BMW things why not ask maker for help DIRECTLY https://blog.uobdii.com/bmw-ista-d-ista-p-windows-7-8-10-download-how-to-install/

On the outside case of the transmission.

won't crank. !

1. call AAA auto club and get a jump yet?
2. all fuses good.
3. does cranking work in PRNDL (NEUTRAL) auto tranny assumed
4. battery cables loose or rusty.
5. bad battery.
6. alternator dead makes battery now dead.?
7. starter relay bad.

there is no such thing ever, CKP it is hall sensor or mag sensor yes the HALL uses 5vdc from the same named pin Of the PCM but the PCM has regulator for that. (not a fuse ever 5V) the PCM has 12V fuses sure. as do every computer in the car. BCM and all. yes all cars and all electronics, or electrics, all have fuse. of one form or another, even like door windows have CB circuit breakers. cranks but will not start , has 50 causes./ SORRY ! a tech knows that and does check ALL FUSEs not just one ever. what if a fuse blew and the CAN_bus network when dead.? yes we check them all , for sure year 2000 up. for SURE> no start (CRANKS FAST)_ MACRO ANSWER.

1. BAD ENGINE, TOP CAUSE CAM BELT SLIP/SNAP
2. NO SPARK, (CMP/CKP, SPARK PARTS BAD OR ABOVE1
3. BAD FUELING , NONE, TOO LITTLE OR TOO MUCH.

#1 HAS THE MOST CAUSE,. LOOK INSIDE ANY ENGINE SEE ALL THOSE HEAD VALVE PARTS TO FAIL? LOTS. WE HAVE TESTS FOR EACH LINE ABOVE , NO EXECEPTIONS, USING TOOLS/METERS/SCOPSES/ AND SCAN TOOLS IF WISE AND ALL FUSE ARE GOOD WE SCAN THE PCM FIRST (OBD2 DLC PORT) AND FOR SURE CRANKED FOR 5 SECONDS TO SEE IT FAIL. WE HAVE NO X3 IN USA, SO CAN NOT WAX SMARTER AND I HATE GERMAN SCHEMATICS, (LOVE ALL OTHERS) THEY USE GERMAN ONLY CODES FOR PARTS. GEESH. NO ASE OR SAE NAMES, In their german world. we have X5 but online no schematics, gotta love BMW. (not me) if engine is good, tested (compression) we test spark next on all cylinders, if all are dead, sure CMP or cam belt. or CMP dead, (or) if spark is bad on JUST one cylinder a new COP coil.? boots bad? if spark is good.we try test fuel (spray can, to air cleaner port filter out) I spray 3 seconds, crank it and runs 3 seconds ,repeat 3 times; if engine sounds great smile and say fueling bad. check fuel pressure using gauge(shop) for spec pressure. check voltage 12vd to pump cranking. bingo do not trust key on pump tests, CRANK IT. (yes 2 persons)