20 Most Recent 2005 BMW 535i Automatic Questions & Answers


Hi. Thanks for your question. For assistance on ticking from 535i you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

BMW 535i Cars &... | Answered on Mar 23, 2018


In front of the radiator core for the engine cooling the cabin fan is behind the glove box inside the air con module

BMW 535i Cars &... | Answered on Jul 22, 2017


http://www.bimmerforums.com/forum/showthread.php?2138647-92-E34-535i-Shifting-problems-won-t-go-into-gear-manual-transmission-this should help

BMW 535i Cars &... | Answered on Jan 01, 2017


Check compatibility of gearbox ECM with gearbox. You will need the serial codes of the ECM and ask manufacturer for relative compatibility with gearbox type.

BMW 535i Cars &... | Answered on Nov 15, 2012


Which engine is in it? Comment below and I'll try and find a diagram for it. First take lots of photos and notes before you start as reference for when you get stuck. (You will get stuck)! you might need to remove plastic guards, covers and some air intake pipes to gain access to some of the pulley wheels when putting the new one on. You will be working by feel only for some of this job so trace the route of the belt with your hand all the way around so you know where its supposed to go.
One of the pulleys the smooth side of the belt runs over is on a spring loaded tensioner arm. This needs to be swung against the spring to slacken the belt. Some engines have a slot or pair of holes you can line up and insert a pin to lock it in the 'slack' position. Again follow the belt around its whole length as you take it off to remind your self exactly where it goes. Fit the new one, this may take several attempts, and carefully release the tensioner.
A lot of companies recommend you change the tensioner as well. I agree as I've had one fail on me when my belt snapped. the tensioners just bolt into place and need to be fitted before you refit the new belt.
Once fitted, again trace it with your hand to check it is squarely set on all the pulley wheels, then start the car.
Then, KEEPING YOUR HANDS WELL CLEAR, look and check the belt is moving smoothly on all the pulleys you can see and not sliding from side to side. Check the dash board for any warning lights or messages and turn the engine off. Refit any pipes, guards and covers, recheck for any warning lights and messages on the dashboard and that should be job done!

BMW Cars &... | Answered 2 days ago


I wwould first make sure that the ground connectors are clean and tight. Here is a forum from bmw talking about the ground problems.

https://www.bimmerfest.com/forums/showthread.php?t=304000

BMW Cars &... | Answered on May 29, 2020


You need a vehicle handbook pertinent to both the vehicle trim level and the territory into which it was exported.

Replacement original literature should be available to order from the local dealer.

BMW Cars &... | Answered on May 28, 2020


https://www.turnermotorsport.com/t-BMW-Engine-Codes

Drivers side of block in a flat section area.
This thread has a list of all the code references in the ID numbers.

BMW Cars &... | Answered on May 26, 2020


For 2003-2006 X3 models, BMW specified an ever changing list of automatic transmission fluids (ATF) as these fluids became obsolete over time. The current recommendation from BMW is DEXRON-VI ATF, which means the fluid conforms to the GM DEXRON-VI specification.Feb 19, 2013

US X3 Automatic Transmission / Fluid Facts - BMW Forums

BMW Cars &... | Answered on May 24, 2020


You have to take the inside door panel off and then remove the window mechanism to get to the door handle bolts.

BMW Cars &... | Answered on May 09, 2020


You will need to go to the main dealer and get the sat nav option added to the spec of your vehicle.

This could be as little as just activation or as much as installing the whole sat nav option.

BMW Cars &... | Answered on May 05, 2020


Ignition fuses or relays hav issue..even wiring undr fusebox may hav binburning. Also make sure theres fuel pressure at rails. Unplug computr n clean contacts..it can bring car to life. Buy a haynes book at parts for detaild repair

BMW Cars &... | Answered on Apr 29, 2020

Not finding what you are looking for?
2005 BMW 535i Automatic Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2008 BMW 535 i
2008 BMW 535 i

-3 Questions

2010 BMW 535i
2010 BMW 535i

-3 Questions

1988 BMW 535i
1988 BMW 535i

-4 Questions

Top BMW Experts

myxelpyxel

Level 2 Expert

43 Answers

Roy Cunningham

Level 1 Expert

35 Answers

old marine
old marine

Level 3 Expert

2281 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

535i BMW

  • 535i BMW

Most Popular Question

2008 bmw 535i cooling fan stays high

  • Cars & Trucks
Loading...