20 Most Recent 2006 BMW 325i Questions & Answers

Transmission is going bad, very common for bmw automatic transmission after 80,000 miles. A repair shop can fix the issue but I recommend new. This is the one issue that stopped me from getting one and getting the 300srt instead.

2006 BMW 325i | Answered on Feb 18, 2019

p1727 is crank sensor fault.
u114b torque controller failed,
now the sensors fault for the crank might be false this can be that the u114b is not relaying the signal, it could be the cable to the auto box, you would need to locate the wire and socket under the car and see if its connecting properly, muck and road wash can damage the seal on the connector and let water in.

2006 BMW 325i | Answered on May 19, 2017

check motor

2006 BMW 325i | Answered on Jan 08, 2017

I believe that is 'limp mode'. You want to get a vagcom reader to see what codes it is posting to see what the cause is.

2006 BMW 325i | Answered on Oct 16, 2016

It's a factory OBD2 code specific to your make and model. Either find the list of codes(frequently difficult) or see the dealer. It usually has to do with something other than the engine or drive tran. Found something on a BMW site. they replaced the water pump & thermostat to fix the problem. Read all the posts on the link I provided.
2E7C and water pump on constantly when car off N54Tech com Your Source for...

2006 BMW 325i | Answered on May 16, 2016

Have you Googled it to see it under photos and diagrams?

2006 BMW 325i | Answered on Jan 26, 2016

have you looked @ that door's 'sensor'? There should be a button somewhere on the door , the door frame or the body that is activated when the door is opened closed.

Per this LINK the button is a part of the hinge:
Thread Door closed opened sensor

2006 BMW 325i | Answered on Mar 05, 2015

Engine management light can mean just about anything. It comes on when the computer detects a fault in the engine or other vital part. it then adjusts what it can to get you home (limp home mode) you need to take the car to a garage and get them to put it on their diagnostic equipment. Trouble with Engine Management light is that it covers just about every part of the engine so unless you have the equipment and skills required its almost impossible for you to tell what's wrong. It may be a very small thing or something more serious but only someone with a diagnostic machine can tell you

2006 BMW 325i | Answered on Feb 26, 2015

Did you bleed the air from the system?

2006 BMW 325i | Answered on Feb 17, 2015

P0140 BMW P0140 BMW - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2

Possible causes - Faulty Rear Heated Oxygen Sensor Bank 1
- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem

2006 BMW 325i | Answered on Jan 15, 2015

new regulator time.....windows don't fall off track without something in the regulator breaking, like the clip from the cable to the window.

2006 BMW 325i | Answered on Jan 03, 2015

remove the intake manifold to get access.

2006 BMW 325i | Answered on Jan 02, 2015

Not finding what you are looking for?
2006 BMW 325i Logo

109 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 BMW 325i
2001 BMW 325i

-50 Questions

2004 BMW 325i
2004 BMW 325i

33 Questions

2003 BMW 325i
2003 BMW 325i

-20 Questions

2006 BMW 325i Ci
2006 BMW 325i Ci

-4 Questions

Top BMW Experts


Level 2 Expert

104 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers


Level 2 Expert

43 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

325i BMW

  • 325i BMW

Most Popular Question

06 bmw 325i cranks over great spark

  • Cars & Trucks