20 Most Recent 2014 Hyundai Santa Fe - Page 8 Questions & Answers

VIN position 10 identifies the model year.
This web page will decode your VIN and give you the information it contains.

To find out whats going on u need to remove the door panel 1st. Theres no way around it. A few screws in the switches & handle & panel itself (or the lwr panel may have platic clips.

look around your engine bay, typically the thermostat housing is at the end of one of the radiator hoses

http://bbbind.com/free_tsb.html

U have a short in that line. Check all the insulation of the wiring going to that bulb.

they have to be all checked for operation the relay has to be checked and you may have to hold the key in the glo position for a few seconds to warm the air in the chambers another problem ( most likely) is that the pressure for the injectors is too low ( HAS TO BE AROUND 25,000PSI) or the injectors are squirting and not atomizing take to an accredited diesel specialist for check and injector fix