20 Most Recent
2012 Volkswagen Eos Questions & Answers
The EPC light is on
First of all you need to access the Engine Control Module (ECM) using suitable diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC's memored. DTC = Diagnostic Trouble Code. Then you will bu full informed about the root cause of the problem, and you will be able to repair & replace bad pieces and reset the ECM. Then the EPC (Electronic Pedal Control) yellow light will turn OFF, and the engine will start.
Electronic control module
Has anybody checked to see if there was any (green in color) corrosion on the connector(s). i.e. ECU or TCM (if automatic).
Reset electronics
When the airbag module detects low voltage, it stores a code that needs to be cleared with an adequate scanner. Inside your glove box there should be a button that has the low tire symbol on it. Turn the ignition on, and after holding the button down for a few seconds, it will reset. The esp light will go out after a short test drive.
Not finding what you are looking for?