2010 Mitsubishi Outlander - Answered Questions & Fixed issues
Need to find wiring to and from fuel sending unit in2008 outlander
Hope this helps, the color code is at the bottom. I looked up your year--make--model in my database, 2.4L engine. At the main fuel level sensor at the bottom, the top wire should be voltage, the bottom black wire is ground. I did see a couple trouble codes for fuel level sensor, one was a po code, the other was manufacturer specific code. I know nothing about this vehicle other than what my database shows. good luck
7/14/2019 2:52:56 PM •
Mitsubishi...
•
Answered
on Jul 14, 2019
•
350 views
Where is the Crankshaft sensor on a Mitsubishi outlander 07 es 3.0l v6 and how do I get to it
If you know anything about gasoline engines at all, I can tell you that the Crankshaft sensor is what replaced the distributor and cap on the engine. You find where the distributor would have been ad that's where the sensor now is. On the top of the distributor shaft. It's easy to get to and no problem to change, it's just a LOT more expensive than the old stuff. Typically only a couple of screws hold it down and you can't screw it up when you use the stuff that comes with the new sensor. Instructions come with it in a kit.
4/7/2019 8:38:07 PM •
Mitsubishi...
•
Answered
on Apr 07, 2019
•
1,349 views
Not finding what you are looking for?