20 Most Recent 2011 Lincoln MKX Questions & Answers

Sounds like it's in limp mode . Is the check engine light on , or a yellow wrench symbol ? could be a problem with electronic throttle control . Have a scan tool hooked up an checked for DTC'S - diagnostic trouble codes . Your gas pedal has sensors inside that wear out , also throttle position sensors inside the throttle body ,this sensors are inputs to the PCM - engine computer .

congratulations

You need to take it an have a factory or professional scanner hooked up an have it checked for DTC'S - diagnostic trouble code's . All the electronic's on your vehicle , control module's , communication networking etc... Is the first place to start a diagnostic procedure . A factory scanner can check for DTC'S in all the modules on the vehicle , not just OBD 2 engine code's . Your vehicle has 15 to 20 different control module's . All light's are controlled by the SJB - smart junction box , ford's body control module . Do you know anything about automotive electronic's ?

Watch it at the link to youtube. https://www.youtube.com/watch?v=D1iUAezzF6A

is the fuse ok or is this controlled by the panel on the dash could it have been turned off by uby accident?

2011 MKX Rear camera works but parking assist quit showing up on the... get your car fix right now

Your battery is fine but will need to be fully recharged. It is your alternator the is going out or very close to bein out now. Replace that and you should be fine.

How to Reverse the Image on Backup Camera eHow EVERYTHING YOU NEED TO KNOW ABOUT REAR VIEW CAMERAS After installing a backup camera on your vehicle, you need to reverse the image so that the image on the screen matches that of your rear-view mirror. The orientation must match so that the driver doesn't get confused with two conflicting images. The nature of the camera's technology is that its image will be recorded un-reflected, but the mirror will display a reflected image. Fortunately, the engineers who designed back-up cameras thought of this and created simple controls for you to change the orientation. Read more : http://www.ehow.com/how_6641139_reverse-image-backup-camera.html

Fuse is probably blown. You can replace the fuse but the underlying problem may be an electrical short that you need to find.

If it is working correctly you just have to open the door if not there is an error in the system and will need to be reprogrammed

most of the time its behind the glove box, you should see an panel that says air filter.

Although the passkey sensor may be at fault, there is an older system that prevents starting your car unless your foot is on the brake. See if your brakelights work. If they do not, then the control switch on your brake pedal lever has been knocked out of position or broken.

For what -- the Keyless Entry on the Door? That came with your owners manual package If you need the factory code & have no manuals, then you have to pay a dealer to get it with a scanner Extra keys- you get at the parts dept & also need the the manual to program

I don't know if your vehicle is still under warranty, that you should know or call your dealership. But it could be a fuse, but I would take it to your dealership to have it checked out and there are no other problems ie wires, etc.

open glove box release glove box stops cabin filter is directly behind glove box