20 Most Recent 2011 Hyundai Sonata Questions & Answers


Follow these steps:
1. Start your engine
2. Press and hold the OK button for five seconds
3. Release it and then press it again once and hold it for a second or two, and the oil light will go away

2011 Hyundai... | Answered on Mar 30, 2020


Hi Angela, look behind the headlamps and you will see a cog like wheel with a small bolt in the middle (below the headlamp harness). use a small ratchet or spanner to turn the whell left or right for up and down to lift or lower the headlamp.Place you vehicle facing something that is white and turning the bolt slowly you will note the headlamp moving up or down. Hope this is helpfull info as that is how i sorted mine out.

120de3d8-f4ca-4d71-b5ab-2e4f601a0b3f.jpg


img_20200108_081337-kygg5xiemkajk32czntn15sd-1-2.jpg


img_20200108_081337-s3ncqsnyrxhqk3t4vki1nnha-5-3.jpg

2011 Hyundai... | Answered on Jan 08, 2020


You usually need to remove the back of the rear seat to remove the package tray.

2011 Hyundai... | Answered on Jul 18, 2019


Battery good? Is the starter being energized via the ignition switch? Starter brushes no good?

2011 Hyundai... | Answered on Feb 23, 2017


There are a few things that could be wrong, best thing to do is, wait until they check your vehicle and go from there. If you have a scan tool, posting the codes you find would help us to assist you.

2011 Hyundai... | Answered on Dec 23, 2016


How much do you know about automotive systems ? Do you know how to hook up a mechanical fuel pressure gauge ? Do you have access to a wiring diagram ? Test fuel pump electrical circuit . You should look at factory service info to see what criteria the computer needs to set this code , if you want to diagnose this yourself . There is a sensor on the fuel rail that the PCM monitors to know what the pressure is . You could pay for a subscription at all data an go to DTC'S section an follow diagnostic flow chart or maybe there could be a video on you tube for that DTC . But first you need to know what all is involved in the fuel system .With a sensor on the fuel rail there is more then likely a FPDM - fuel pump driver module - that is commanded on an off (PWM) pulse-width modulation control .
If you don't know any of this your best bet would be to take your vehicle to a qualified repair shop . Sorry , but if you don't know any of this you shouldn't be messing with it .This video is on a ford but pretty much the same .
Ford Electronic Returnless Fuel System Diagnosis Part 1

2011 Hyundai... | Answered on Oct 18, 2016


It could be something else but this is a 2011, There pretty much right on with the codes now a days. The pressure sensor for the manifold shouldn't be that hard or expensive to replace. Unfortunately is an electrical part, that's the biggest problem. Good Luck

2011 Hyundai... | Answered on Oct 12, 2016


It will be in the fuse panel located on the driver side down by the left leg/foot. There will be a panel that pulls off exposing the fuse box.

2011 Hyundai... | Answered on Mar 31, 2016


Usually they are on the front of the car in or near the air dam (bottom of the front bumper).

2011 Hyundai... | Answered on Mar 21, 2016

Not finding what you are looking for?
2011 Hyundai Sonata Logo

257 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sonata Hyundai

  • Sonata Hyundai

Most Popular Question

remove rear window parcel tray 2011

  • Cars & Trucks
Loading...