20 Most Recent 2010 Hyundai Elantra Questions & Answers

It may have a factory amp that either went out or blew a fuse...did it work before?

2010 Hyundai... | Answered on Sep 07, 2016

Bring it to a service center, and consider trading the car in. The Hyundai is not known for durability. Their usability range is around four years. Buy a better car and save money. My Hyundai lasted four years but many suspension, steering, electrical, and braking issues. I now drive an Infinity for the past 7 years, and 160,000 miles. Not a single repair bill, just scheduled maintenance.

2010 Hyundai... | Answered on Jun 09, 2016

Best Manuals

to fix your problem visit this site

2010 Hyundai... | Answered on Apr 06, 2016

There should be a small rubber plug near the shifter that you can see near the shifter, take that out and insert a key or screwdriver in it and gently press down. This unlocks the shifter. In the mean time the same circuit is wired to the brake pedal and has a switch and if it comes loose or fails then it wont shift out of park so check the brake pedal switch.

2010 Hyundai... | Answered on Feb 15, 2016

Have the accessory drive belt ( Alternator ) checked for proper tension. It may need adjustment if it is loose causing this noise

2010 Hyundai... | Answered on Jan 19, 2016

Is the mechanical dirty if so maybe just a good cleaning will do hope this helps

2010 Hyundai... | Answered on Sep 10, 2015

remove the belt, undo the pulley nut, use a special puller to pull the pulley from the shaft, ( available from good tool shops or auto spares shops)undo the retaining bolts for the clutch and replace
mostly it can be done in car without the need to break the gas side of the system

2010 Hyundai... | Answered on May 20, 2015

Yes that can happen and your dealer can change the code for you if you ask him. But it will cost you.

2010 Hyundai... | Answered on Mar 17, 2015

If it's an automatic, the gearshift must be in PARK before the key can be removed from the ignition.

2010 Hyundai... | Answered on Mar 13, 2015

Plugs are usually located in the grill area, so you don't have to open the hood. Are you sure you have a block heater

2010 Hyundai... | Answered on Feb 17, 2015

The Ignition Cylinder may at fault. If it's preventing the column from locking, even though you are able to remove the key, the ignition may actually still be on.

Except for the cars computer, alarm system, headlights, and door locks, as well as temporary draws such as the dome light, radio and power windows, everything depends in the ignition to be on to function.

If somehow the ignition is still on, then all of the cars systems may be drawing power from the battery at a rate sufficient enough to drain the battery.

I would take it to a professional, electrical issues can be tricky and if ignored could lead to severe electrical damage.

2010 Hyundai... | Answered on Jan 14, 2015

Drivers side fuse panel the fuse says ROOM LP

2010 Hyundai... | Answered on May 30, 2014

Not finding what you are looking for?
2010 Hyundai Elantra Logo

121 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Elantra Hyundai

  • Elantra Hyundai

Most Popular Question

s 40 elantra 2010 start cannot find

  • Cars & Trucks