20 Most Recent 2010 Chevrolet HHR - Page 2 Questions & Answers

This has been answered.

2010 Chevrolet... | Answered on Feb 25, 2017

I looked at info for 2.4L engine.
front hub--155 ft lbs

2010 Chevrolet... | Answered on Dec 13, 2016

http://www.obd-codes.com/p0011 http://forum.haynes.com/showthread.php?11109-How-to-fix-P0010-amp-P0011-Codes-Help! the following links can help you with your codes check the wiring as well as connections and oil if over due - oil dirty or worn can cause these codes to pop location of int solenoid is If you have the stock airbox on(or cover), take it off and on top of the engine you will see 2 solenoids(side by side) in front the 1st cylinder that go into the head. Those are the int/exh solenoids for V V T. check and test wiring and connections or Replace the int solenoid and your issue will more than likely be solved

2010 Chevrolet... | Answered on Sep 05, 2016

It could be the wire from the alternator to the ECM. Or the ECM has shorted.

2010 Chevrolet... | Answered on Mar 22, 2016

Check that license plate...

If it checks... think dead battery... and try CALMLY re-inserting your key... gently wiggling to see if you get some lateral motion.

It is not IMPOSSIBLE to have picked up the WRONG KEY... try getting that OTHER key and attempting entry again.

Then call out the AUTOCLUB... roadside assistance.

2010 Chevrolet... | Answered on Jan 08, 2016

There is a fault somewhere need to plug the car in and find the fault

2010 Chevrolet... | Answered on Dec 26, 2015

26 is relay

2010 Chevrolet... | Answered on Jul 24, 2015

DTC P0011: Intake Camshaft Position (CMP) System Performance .
Do you change your oil regularly ?


2010 Chevrolet... | Answered on Apr 16, 2015

some models are under the rear section of center console. It needs to be reprogrammed if you replace it. Also there is some recalls on the hhrs

2010 Chevrolet... | Answered on Apr 11, 2015

i think i would contact a different dealer. it sounds like a bad computer, but either way, that is a safety issue and should be corrected. you might want to purchase a code reader and find out what code its being triggered. these are not very expense and are really handy to have. about 20.00 at newegg.com. Check these codes and then ask for help from a different dealer or an out side mechanic.

2010 Chevrolet... | Answered on Mar 20, 2015

Look on the brake pedal lever for an electric switch. Replace the switch and see if that works. If not, get under the vehicle and look for a loose wire on the transmission. If this doesn't work, you will have to take the vehicle to a transmission shop. There is likely a loose wire or a bad servo inside the transmission. But the shop will first run a diagnostic check. They will then know what the problem is and repair it.

2010 Chevrolet... | Answered on Mar 14, 2015

If he didn't clear the computer fault codes the light will come back on. Usually the light will go off after about 30 miles of driving after the problem is fixed if the codes were not manually cleared. Take your car to another mechanic.

2010 Chevrolet... | Answered on Mar 11, 2015

Ask parts store to show you on parts locator chart.

2010 Chevrolet... | Answered on Jan 22, 2015

First thing to check is all the brake lights including the third light they must all work to complete the curcuit. Then the fuses if they are all good then you will need to have the cruise module tested

2010 Chevrolet... | Answered on Jan 02, 2015

run the fault codes to check for possible sensor failures. this could be injector related but it will be difficult to find as the rpm range is only 300 rpms. This could equate to a down shift of the transmission as there is about 300rpm between ratios in the box.

2010 Chevrolet... | Answered on Dec 15, 2014

check the manifold gaskets, upper and lower. maybe they are bad and coolant is mixing with the oil, and burning it up and throwing it out the exhaust pipe, witch will cause it to smoke. check the oil to see if coolant is entering it. on dip stick, also check to see if coolant in recovery tank has oil in it. I had a problem with oil getting to coolant, on a 2000 malibu, changed gaskets and did a good flush. before filling it back up with coolant. No problems it run good. Good-Day!

2010 Chevrolet... | Answered on Jul 23, 2014

Hi Misty,

Here is a forum with the right talk going on, join up and you will get lots of answers, Time to replace starter 07 HHR 2 4L Chevy HHR Network . Here is a technical manual link as well. Not much to choose from on the web. Amazon com hhr repair manual . You could probably pick it up locally at Auto Zone or Advance if you are in the US. Fare. well.

2010 Chevrolet... | Answered on Jul 05, 2014

Not finding what you are looking for?
2010 Chevrolet HHR Logo

115 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts


Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HHR Chevrolet

  • HHR Chevrolet

Most Popular Question

torque 2010 hhr front axel nut

  • Cars & Trucks