20 Most Recent 2002 Infiniti I35 Questions & Answers

The simplest fix is just to use the highest octane of fuel available in your area, and see if that fixes your problem. Sure cheaper than getting a new car!

On the hardware front, it looks like you have not replaced the knock sensor, a relatively cheap component which might be the cause of your problems.

2002 Infiniti... | Answered on Nov 27, 2017

Hate to say it, but, you may want to have it professionally diagnosed. Sometimes when you have a lot of issue occur like this at one, it could be a BCM (Body Control Module). Looking for one at a salvage yard can be very difficult due to the variations of BCM's among vehicles even of the same model.

2002 Infiniti... | Answered on Jan 28, 2016

the output of the alternator is not sufficient for the job
could be a faulty regulator , drive belt adjustment
have the unit bench tested and check that the replacement alternator had the same amp capacity ir better then the replaced unit

2002 Infiniti... | Answered on Aug 26, 2015

remove wheel, unbolt steering track rod,unbolt the ball joints ,you will need some sort of joint splitter ,this is a metal forked wedge that you hammer between the joint and chassis when replacing new joint you will need to use a jack under new joint to apply some pressure so that when you tighten the nut then ball joint does'nt spin round and not tighten,make sure you know the torque for the nuts as over tightening can cause joint to fail in some way this is important to get right

2002 Infiniti... | Answered on Apr 27, 2014

go to auto parts store and they will scan and tell u what the problem is

2002 Infiniti... | Answered on Apr 10, 2014

use a scan tool borrowed from parts store, and / or use this procedure.

Infiniti I35... | Answered on Nov 11, 2018

As you have probably discovered, the diagram isn't included in the
Owner's Manual (http://www.downloadcarmanuals.com/1997-infiniti-i30-owners-manual-download) or even the service manual (Infiniti I30 and I35 Factory Service Manuals NICOclub).
It looks like the layout is the same as the Maxima from that era:


The 1998 layout is the same, although I'm not sure whether the actual lid/door will fit-
98 1998 Infiniti I30 Gray Fuse Block Cover Lid Door Panel Bezel OEM M88...

98 1998 Infiniti I30 Fuse Block Cover Lid Door Panel Bezel OEM 68964 eBay

Infiniti I35... | Answered on Oct 23, 2017

check the oil strainer

Infiniti I35... | Answered on Oct 04, 2017

Is check engine light on? Get the codes rrad with a obd2 scan tool and google sesrch the codes.

Infiniti I35... | Answered on May 31, 2017

Not finding what you are looking for?
2002 Infiniti I35 Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Infiniti Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

I35 Infiniti

  • I35 Infiniti

Most Popular Question

stop car from pre detonating

  • Cars & Trucks