20 Most Recent 2007 Ford Fusion Questions & Answers

0helpful
1answer

Como cambiar banda de tensor Ford Fusion 2007?

English only on Fixya please How to change 2007 fusion tensioner band I don't know how to install it I would like to see a diagram aqui https://www.google.com/search?q=2007+ford+fusion+serpentine+belt+diagram ..
12/13/2022 11:20:50 PM • 2007 Ford Fusion • Answered on Dec 13, 2022
0helpful
1answer

2007 Ford Fusion. How to bypass a/c compressor please?

You remove the compressor and put a Bypass Pulley in its place. The routing and belt remain the same. https://www.google.com/search?q=2007+Ford+Fusion+AC+bypass+pulley ..
12/1/2022 5:37:51 AM • 2007 Ford Fusion • Answered on Dec 01, 2022
0helpful
1answer

2007 Ford Fusion. Without pumping or removing fuel tank other ways to empty it?

Fill it with Good gas and fuel stabilizer to dilute the bad gas. Or disconnect the pipe from the fuel tank and use the pump to pump the gas out. Make sure you stop as soon as flow stops because the fuel in the tank lubricates and cools the pump. Or you can syphon it out with a length of 1/2" plastic tube.
10/10/2022 8:21:12 PM • 2007 Ford Fusion • Answered on Oct 10, 2022
0helpful
1answer

2007 Ford fusion flywheel spins but won't crank engine

The3 starter may be spinning and not engaging the flywheel. Bad starter.
8/21/2022 6:04:59 PM • 2007 Ford Fusion • Answered on Aug 21, 2022
0helpful
1answer

2007ford fusion flywheel spins but won't crank

if free spinning sounds like bolts are gone [loosened or sheared ]
8/21/2022 5:47:31 PM • 2007 Ford Fusion • Answered on Aug 21, 2022
0helpful
2answers

07 fusion serpentine belt diagram

This is for 2.3L engine. fusion belt-undefined-undefined-0.jpg
5/2/2021 8:08:43 PM • 2007 Ford Fusion • Answered on May 02, 2021
0helpful
2answers

I have no spark to the coils on my 2007 Ford Fusion 3.0L engine. Car will not start.

Crank sensor and power to the coils need verification .
11/5/2019 3:53:01 PM • 2007 Ford Fusion • Answered on Nov 05, 2019
0helpful
2answers

2007 Ford Fusion alarm keeps going off and horn honking for no reason.

Under-hood Fuse/Relay Box fuse number 47 is the Horn as well as for the ABS control unit, Brake lights, Cruise control unit,Horn relay, Ignition key light, Key interlock switch (A/T), PCM or ECM. So, no way you can pull the fuse. What you can do is to pull and replace your Horn Relay. the horns are located in front under the hood beneath a cover. You may find a sparw fuse inside the fuse box but look at the sparw for its compatibility with the used one.
10/2/2019 12:49:11 PM • 2007 Ford Fusion • Answered on Oct 02, 2019
0helpful
1answer
0helpful
1answer

Fix 2007 ford fusion code p0118

P0118: Engine Coolant Temperature Sensor Circuit High http://www.autocodes.com/p0118_ford.html
10/8/2018 8:03:25 AM • 2007 Ford Fusion • Answered on Oct 08, 2018
0helpful
1answer

2007 FORD FUSION, RIGHT REAR WINDOW POWERED DOWN, THEN IMMEDIATELY WOULD NOT POWER UP AGAIN, NO NOISE, JUST DEAD. ALSO NOTICED THAT THE SWITCH IS NOT ILLUMINATED, ALL OTHERS ARE FUNCTIONING PROPERLY

If u r referring to the control box usage then that particular switch in the control box established corrosion u can clean by dismantling the unit that switch clean the contact if u r know legible however u need to test for voltage from the control box to the window motor by pressing the switch up and test for voltage at the motor and press down and test for voltage at the motor also if no power try to clean the switch contact at the control box if able or replace a used one make sure ur wiring in order and test for voltage again if voltage established plug it to the motor and switch up and down see if problem is resolved if not check for window rail alignment if ok most likely your motor is bad. Good Luck
1/3/2017 4:39:25 AM • 2007 Ford Fusion • Answered on Jan 03, 2017
0helpful
1answer

2007 ford fusion heater fan not working.it was working sometimes but now it wont work at all.

Probably the blower motor is bad , worn brushes , armature commutator . They get worn spot on the commutator . You mite try hitting on the bottom of the blower motor housing to see if that makes it work . If it starts working the motor is bad .
12/21/2016 7:23:37 PM • 2007 Ford Fusion • Answered on Dec 21, 2016
0helpful
1answer

Location bleed valve on 2007 ford fusion 3.0

What system are you trying to bleed
12/20/2016 9:36:30 PM • 2007 Ford Fusion • Answered on Dec 20, 2016
0helpful
1answer

How to repair trouble code p0118 for 2007 ford fusion

Engine Coolant Temperature Sensor Circuit High http://www.autocodes.com/p0118_ford.html
10/23/2016 10:57:55 PM • 2007 Ford Fusion • Answered on Oct 23, 2016
0helpful
1answer

How do I remove the headrest from 2007 ford fusion?

a standard ford head rest look for a pusher button or pin on the base plastic where the two metal guides go into the top of the seat might need to to push in both at the same time and lift the head rest if it stops at the top you keep pulling upwards
9/16/2016 11:36:54 AM • 2007 Ford Fusion • Answered on Sep 16, 2016
0helpful
1answer

How to replace a 07 ford fusion wheel bearing assembly

You have to remove the spindle to replace the bearing. Disconnect the brake caliper and bracket. disconnect the lower ball joint. disconnect the strut. This removes the spindle. The bearing and hub have to be pressed out and back in. Push the hub out first. Then there is a C clip to remove behind the hub. Then push out the bearing. If you don't have a 20 ton press , (if you do have on, beware. You have to get the spindle level when removing and installing the parts. the spindle will break if you don't have it mounted solid on the pads). Then call and find a parts store that does this. Costs about $35 where I live. Garages can do this, but costs start at $75.
3/11/2015 11:16:08 PM • 2007 Ford Fusion • Answered on Mar 11, 2015
Not finding what you are looking for?
2007 Ford Fusion Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15083 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fusion Ford

  • Fusion Ford

Most Popular Question

replace 07 ford fusion wheel bearing

  • Cars & Trucks
Loading...